Laser cutting smoke dust collector MCJC-5500

Laser cutting smoke dust collectorIt is a commonly used supporting or cleaning equipment in industry, which can be used for collecting waste in industrial production processes, filtering and purifying air, and cleaning the environment. At the same time, it can be used in conjunction with industrial production equipment to absorb dust and debris generated during production, ensuring a clean working environment and the health of employees. For example, dust collectors are widely used in the textile and chemical industries, reducing the hazards of some occupational diseases. In terms of performance, industrial dust collectors are generally divided into industrial dust collectors, * suction systems, * dust removal systems; The installation methods include mobile, fixed, and * system.

Laser cutting smoke dust collectorcorrect usage

1、 There are various types of industrial dust collectors, with different models, specifications, structural performance, and functional characteristics. Before use, it is necessary to carefully read the instructions to avoid damage to the industrial vacuum cleaner and endangering the safety of the user due to improper use.

2、 The operating environment temperature of ordinary industrial dust collectors should not exceed 40 degrees Celsius, and the workplace should not be above an altitude of 1000 meters. There should be a good ventilation environment, and the air should not be used in a dry indoor environment with flammable or corrosive gases.

3、 Before use, the end of the hose should be connected to the suction port, and the front end of the hose should be connected to each section of the extra long connecting pipe and the suction nozzle. The joint should be tightened tightly, and the noise during use is high,

4、 Connect the grounding wire to ensure electrical safety. Specially designed industrial vacuum cleaners can work continuously for 36 hours without stopping due to the use of a special cooling system, and can be used in conjunction with machine tools.

5、 When using an industrial vacuum cleaner equipped with an automatic winding device, simply pull out the power cord to a sufficient length for use. Do not pull the power cord over. If you see a yellow or red mark on the power cord, immediately stop pulling it out to prevent it from being pulled too far. If you need to retract the power cord, simply press the button to automatically retract it.

6、 Dry industrial dust collectors are not allowed to absorb water, and wet hands cannot operate the vacuum cleaner. If there are large paper clumps, plastic sheeting, or waste larger than the diameter of the straw in the area that needs to be cleaned, they should be removed in advance, otherwise it is easy to cause straw blockage.

7、 When industrial dust collectors extract liquid substances, the filter element should be removed and attention should be paid to timely emptying the liquid.

8、 Before using any industrial dust collector, the suction force should be adjusted according to the different cleaning locations. Generally, there is a circular hole in the bent pipe with an adjusting ring on top. When the adjusting ring covers the hole on the bent pipe, the suction force is high, and when the adjusting ring exposes the circular hole *, the suction force is low. Some industrial vacuum cleaners use electric motor speed regulation to adjust suction.

9、 Single industrial vacuum cleaner motors are mostly high-speed motors, and the brushes are prone to wear during operation. Generally, the brushes should be replaced once every one to one and a half years of use.

10、 It is necessary to clean the garbage in the dust storage bin in a timely manner, and at the same time, remove the accumulated dust on the filter to avoid blocking the filter, causing a decrease in suction, motor heating, and reducing the service life of industrial vacuum cleaners.

11、 When the suction force of the industrial dust collector decreases, the oscillator on the vacuum cleaner can be vibrated to restore the suction force. If the oscillator on the vibrating vacuum cleaner cannot restore suction, it indicates that the dust in the dustbin is full and should be cleaned in a timely manner.

12、 After use, industrial dust collectors should be stored in a dry environment. If placed in a damp place, it will affect the insulation performance and service life.