TB125-3 2.2KW through type medium pressure fan

Characteristics:

1. Wide range of air volume, pressure, and vacuum degree:

Caliber: 40mm-300mm (1.5 '-12'); .

Airflow: 0.36-160m3/min (12-5700CFM);

Pressure: One section of GRB type can reach 8000mmAq (0.8kgf/cm2).

2. The exhaust gas does not contain oil stains.

3. Computer dynamic balance correction with low vibration and noise.

4. The air volume is stable, and pressure changes have little impact on the air volume.

5. Special impeller design, high efficiency and energy saving.

6. Simple and sturdy construction, *.

7. Use first level grinding gears for high precision, long lifespan, and low noise.

8. Strict quality management and standardized products.

TB125-3 2.2KW through type medium pressure fan

Precautions for use:

If the flow rate is found to be too high, does not meet the usage requirements, or requires a smaller flow rate in a short period of time, a throttling device can be used for adjustment.

2. Regularly check the sensitivity of thermometers and oil gauges, and control the oil level in the bearing box within the specified allowable range.

3. If any abnormal phenomenon is found during the driving, parking or operation of the fan, it should be checked immediately.

4. For minor faults discovered during inspection, the cause should be promptly identified and efforts should be made to eliminate or handle them. If minor faults cannot be eliminated or major faults are discovered, immediate inspection should be carried out.

5. In addition to replacing the lubricating oil after each disassembly and repair, the lubricating oil should also be replaced regularly.

6. The bearing seat of E-type transmission should be regularly (quarterly) inspected, cleaned, and lubricated to prevent bearing burnout.

structural characteristics

1. High temperature fans are mainly composed of impellers, casings, air inlets, motors, connectors, cooling blades, and other parts.

2. The impeller adopts a multi blade single inlet centrifugal impeller, made of high-quality galvanized or cold-rolled steel plate, and the blades are designed based on aerodynamic principles. The impeller consists of 10 aft tilting airfoil blades, a curved front plate, and a flat rear plate. The material is made of high-quality steel plates with high strength and durability, and undergoes strict dynamic and static balance correction. Good air performance, high efficiency, and smooth operation.

3. The air inlet adopts a convergent streamlined vortex reduction form, which reduces airflow loss and improves the working efficiency of the high-temperature fan.

4. The casing of the high-temperature fan is connected to the motor through a metal casting installation. The motor shaft head is equipped with a cooling fan blade, and the outer wall of the metal casting is provided with inlet and outlet pipe interfaces to cool the metal casting and shaft head, ensuring the normal operation of the motor at high temperatures.

5. The motor adopts a special high-temperature motor, and the fluid part of the high-temperature fan is made of heat-resistant materials, with reliable cooling structure performance. Compared to other boiler induced draft fans, it has the advantages of simple structure, easy maintenance, and high cost-effectiveness.

Our company can manufacture and produce according to the provided samples, or customize non-standard products according to customer requirements (High temperature resistant fans can be customized; high temperature resistant fans of 80 degrees, 100 degrees, 120 degrees, 150 degrees, 180 degrees, 200 degrees, 250 degrees, and 300 degrees); Can provide products that comply with CCC and CE standards.