Welcome Customer !

Membership

Help

Jinan Qiancheng Analytical Instrument Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Large air generator

NegotiableUpdate on 02/16
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
After the large air generator has been working continuously for a period of time, it is necessary to check whether the color changing silicone in the drying room has changed from blue to pink or white. If it has changed color, it should be replaced in a timely manner (note: the replacement of silicone should be carried out under the instrument's no pressure state). After replacing the silicone, the airtightness of the drying tube should be checked in a timely manner.
Product Details

Large air generatorPerformance characteristics:

The dry air generator has the advantages of stable output pressure, low noise, and strong purification ability, making it an ideal air source to replace high-pressure air cylinders. This product can be used in gas chromatographs and analytical laboratories, and can also serve as an air source for high-purity nitrogen generators.

Small size, light weight, reasonable structure, simple operation, and convenient use;
Low vibration, low noise, stable output pressure, and air pressure fluctuation not exceeding ± 0.005Mpa;
Equipped with secondary protection devices for overvoltage and overcurrent;
Can be used continuously or intermittently, with stable performance.

    Large air generatorParameters:

    • Air purity; dry;
    • Output flow rate: 0~m ³/min;
    • Output pressure: 0.4Mpa;
    • Work noise:<30 decibels;
    • Below -40 ℃,
    • Dimensions: 415 (L) × 200 (W) × 370 (H) (Unit: mm)
    • application environment

    Environmental temperature: 10-40 ℃;

    Relative humidity: not exceeding 85%;

    Supply voltage: 220 ± 22V;

    Power supply frequency: 50 ± 0.5H2

    Power consumption: 150W;

    Instrument weight: approximately 22Kg.

    Product operation method:

    Connect the power and the instrument starts working;
    The factory set output pressure of the instrument is 0.3Mpa
    After using the instrument, turn off the power of the instrument.