Laibao vacuum pump accessories blade type application optical coating industry

Laibao vacuum pump accessories blade type application optical coating industryVarious models of Leybold vacuum pumps, including SV100A, SV200, SV300, SV630, etc. These blades are not easily deformed or bent during oil disturbance start-up and operation under high inlet pressure. They have a lower density than iron, lower centrifugal force, less wear on the cylinder wall, and will not directly bite into the metal. They can withstand high temperatures, with a thermal expansion coefficient in the length direction comparable to cast iron, a larger expansion coefficient in the thickness direction, higher hardness, lower oil lubrication friction coefficient, and wear resistance and durability under sufficient oil lubrication.System configuration: The SV630B vacuum pump can be combined with other vacuum pumps such as Roots pumps to form an efficient vacuum unit that meets different vacuum requirements.

Installation and commissioning: During the installation process, it is necessary to ensure that the pump body is placed horizontally, the inlet and outlet are connected correctly, and the motor direction meets the regulations. During debugging, it is necessary to gradually adjust the working parameters of the pump to ensure that it reaches the optimal working state. Operation and Monitoring: Operators need to be familiar with the operating procedures of the pump, regularly monitor the working status of the pump, such as temperature, pressure, noise, etc., and promptly detect and handle abnormal situations.

Normal maintenance and upkeep

Regularly replace vacuum pump oil: Based on usage and the quality of the vacuum pump oil, it is recommended to replace the vacuum pump oil every 700 to 3000 hours and also replace the oil mist filter. Make sure to empty the old oil every time it is replaced to avoid mixing old and new oil.

Cleaning vacuum pump components: Regularly clean vacuum pump components such as rotors, rotors, cylinder bodies, etc., to keep them clean and prevent impurities from blocking and damaging them. Inspection and replacement of vulnerable parts: Regularly inspect the vulnerable parts of the vacuum pump, such as the oil mist separator, anti backflow valve, etc. If there is any damage or wear, they should be replaced in a timely manner.When installing the blades of the Leybold vacuum pump, attention should be paid to the cleanliness and smoothness of the rotor groove to ensure that the blades can move easily and smoothly in the groove. Due to possible differences in thickness and weight between the new and old blades, it is recommended to replace all three blades simultaneously and pay attention to the direction of the blades. The oil guide groove should be set according to the direction of operation to ensure the normal operation of the vacuum pumpLaibao vacuum pump accessories blade type application optical coating industry