Laboratory universal glass fermentation tank

Equipment name(Bidding Parameters)5LLaboratory universal glass fermentation tank

Oneworking conditions

1This device can be placed in a regular laboratory or room (tap water is required),220VAC power, drainage system).

IITechnical requirements and configuration

5LLaboratory universal glass fermentation tank；Tank structure:Volume 5L, ex situ sterilization, working pressure 0.1Mpa;High temperature resistant, acid alkali resistant, and corrosion-resistant silicon boron glass cylinder combined with 316L stainless steel;

control system

2.1Temperature control system:PID intelligent control

2.2 PHOnline detection and control system ImportPHElectrodes and cables)

intelligent pid；pHControl mode: Three control modes, manual control/real-time automatic control/FT mode automatic control, among which FT control mode is an important control mode for fermentation. Provide an operation video of no less than 20 seconds for the above functions of the softwareRange: 2~12ph; Control accuracy: ± 0.02ph;

2.3 DOonline detection ImportDOElectrodes and cables);intelligent pid

2.4Pressure and flow control system:The rotor flowmeter displays and adjusts the gas flow rate according to process requirements

2.5Feeding system：A comprehensive feeding system (acid, alkali, culture agent, defoamer) that can provide timed and quantitative feeding;

2.6Defoaming system

2.7Speed control system

2.8.Instantaneous gas production rate detection system;EFSRGas production rate module:0-5000ml/hFully automatic online digital detection

2.10 Lower level fermentation process control system

It can detect and control the stirring speed, temperature, feeding, defoaming, cumulative gas production, and instantaneous gas production rate of the fermentation tank, especially for accurate detection of cumulative gas production and instantaneous gas production rate, which can be corrected and controlled in the software engineer interface. The bidding manufacturer shall provide a copyright registration certificate for the data analysis software to ensure that it is an independent intellectual property protection (non third-party software) of the bidding manufacturer, without any other defects in its rights, and does not infringe any intellectual property or trade secrets of any third party