Laboratory pure water system

1Lab WatersystemParameters of laboratory pure water machine:

1. Water production capacity: ≥ 5L/H (+10%);

2. Pure water quality: intake flow rate (L/min): 1-2; Meets the laboratory water specification GB6682-2008 Grade III water standard, with a resistivity of ≤ 0.5 μ m/ cm@25 ℃； Microbial removal rate: ≥ 99%; Organic matter removal rate: ≥ 99%; Inorganic ion removal rate: ≥ 96%; Particle removal rate: ≥ 99%;

3. Ultra pure water quality: intake flow rate (L/min): ≥ 1; Electrical resistivity: 2-10 M Ω .cm@25 ℃； Absorbance ≤ 0.001 (254nm, 1cm optical path). Capacitive silicon is calculated as (SiO2) ≤ 0.01mg/L;

4. Tap water, inlet pressure: 0.15Mpa-0.5Mpa, total dissolved solids TDS: ≤ 420PPM, temperature: 5-40 ℃.

2、 Equipment configuration for laboratory pure water engineering:

1. Quantity: 1 set.

2. Appearance: The chassis is made of ABS engineering plastic, which is rust resistant and aesthetically pleasing. Size: 430 * 500 * 560mm.

3. In addition to a fully functional host, the following accessories are required:

a. 1 set of pre-treatment (3 columns) b. 2 wrenches c. 1 set of water connection tee d. 1 box of raw material belt e. Intermediate water tank: 3.2G pressure water tank.

IIILab WatersystemApplication fields:

Routine qualitative analysis experiments such as biochemical analyzer, solution preparation, preparation of chemical reagents, buffer solution, culture medium, university student experiments, and physical and chemical testing.

There are multiple models of laboratory pure water machine seriesFYC(5-15)01/02； FFC-(5-15)01/12； FBC-(5-15)01/02。