Laboratory intelligent biochemical incubator

The laboratory intelligent biochemical incubator adopts an imported compressor unit with fast cooling speed and uses fluorine free refrigerant, which is environmentally friendly, efficient and energy-saving. It mainly consists of heating, cooling, humidification, feedback system and control system, and uses thermal resistance wire and compressor to adjust the temperature rise and fall, achieving temperature controllability.

　　Laboratory intelligent biochemical incubatorIt mainly consists of heating, cooling, humidification, feedback system, and control system. By using thermal resistance wires and compressors to regulate temperature rise and fall, temperature control is achieved. At the same time, a humidifier is used to regulate humidity, achieving humidity control (bidirectional temperature control system), to simulate a certain temperature and humidity environment for the cultivation, preservation, plant cultivation, breeding experiments, etc. of bacteria, fungi, and microorganisms.

　　

Product features of laboratory intelligent biochemical incubator:

　　

1. This product adopts an imported compressor unit with fast cooling speed and uses fluorine free refrigerant, which is environmentally friendly, efficient and energy-saving.

　　

2. Microcomputer intelligent control, LCD display controls temperature and time, with over temperature alarm function, and data loss caused by power outage and system crash.

　　

3. It has over temperature alarm function and call recovery data function.

　　

4. The exterior is coated with baking paint and matte coating to avoid light radiation. The partition can be adjusted freely, and the inner liner is made of mirror stainless steel material. The circular arc design avoids blind spots caused by right angle airflow.

　　

5. Using imported centrifugal fans, the cold and hot are fully mixed and blown into the box to ensure a more precise and uniform temperature.

　　

6. The independent fresh air device can be used to open and close the air inside the regulating box at any time to keep the air inside fresh.

　　

7. Use non consumable unconventional automated frost to avoid temperature impact and ensure continuous long-term use of the equipment.

　　

Precautions and maintenance:

　　

1. Care must be taken during transportation, and the angle between the box and the horizontal plane must not be less than 60 °.

　　

When the temperature is low, condensation water will be generated inside the incubator. The accumulated water in the bottom water tray of the incubator should be regularly emptied.

　　

To maintain the appearance of the equipment, do not use acid, alkali, or other corrosive substances to wipe the surface of the box. The box can be regularly wiped dry with a dry cloth.

　　

When the incubator is not in use, the power plug should be unplugged.

　　

5. The distance between the incubator and the wall should be greater than 10cm to ensure good heat dissipation of the refrigeration system.

　　

6. The indoor environment should be dry, well ventilated, and the relative humidity should be kept below 85%. There should be no corrosive substances present, and direct sunlight on the incubator should be avoided.

　　

7. The power supply used must have a reliable ground wire to ensure reliable contact between the ground wire of the incubator and the ground wire of the grid power supply, in order to prevent harm caused by leakage or accidental use of the grid power supply.

Laboratory intelligent biochemical incubator parameters: