Laboratory instrument moving service

‌Pre relocation planning and management‌

1. ‌Build a professional team‌

   Establish a relocation team consisting of equipment engineers, safety specialists, and project leaders, clarify division of labor, and file a list of equipment. ‌‌2‌‌3

2. ‌Environmental pre assessment‌

   ：

• Measure the water and electricity load, ventilation system, and gas cylinder layout of the new laboratory to ensure compliance with GB/T 32146 "Technical Requirements for Laboratory Design and Construction". ‌‌‌‌4

• Plan the equipment flow line, verify the load-bearing capacity of the freight elevator and the size of the passage (it is recommended to leave a 20cm safety margin). ‌‌2‌‌5

3. ‌Pre treatment of dangerous goods‌

   ：

• Triple sealed packaging (inner glass bottle+middle cushioning material+outer explosion-proof box) is used for hazardous chemicals, and a separate leak emergency kit is provided for highly corrosive liquids. ‌‌‌‌6

• Radioactive materials are entrusted to CNAS qualified institutions for processing, and biological samples are transported under dual temperature monitoring. ‌‌7‌‌8

‌Risk management during relocation‌

1. ‌Precision equipment protection‌

   ：

• Class I equipment such as mass spectrometers use air cushion shock absorbers. Before disassembly, mark the position of optical components and take photos for archiving. ‌‌7‌‌8

• Seal the interface of the liquid chromatography pipeline with cling film to prevent foreign objects from entering. ‌‌1

2. ‌Transportation safety guarantee‌

   ：

• A dedicated transport vehicle equipped with a temperature and humidity recorder and GPS positioning, with a speed controlled within 40km/h. ‌‌6‌‌9

• Vehicles transporting hazardous chemicals must hold a "Road Dangerous Goods Transport License" and the driver must have the qualifications for transporting hazardous chemicals. ‌‌‌‌3

‌Commissioning and acceptance after relocation‌

1. ‌accuracy verification‌

   ：

• The electronic balance needs to be preheated for 24 hours before calibration, and the liquid chromatograph uses standard samples for retention time drift testing (allowable deviation ≤ 2%). ‌‌4‌‌8

• Biosafety cabinets are used for detecting airflow patterns and descending wind speeds. ‌‌10

2. ‌Qualification maintenance‌

   ：

• Submit the "Address Change Application Form" to CNAS within 20 working days, and stop using the approved logo until it passes the on-site review. ‌‌1‌‌3

• Keep performance verification records before and after equipment relocation for future reference, with a period of no less than 3 years. ‌‌

•