Laboratory infusion pump

Laboratory infusion pumpProduct features: High precision, high thrust, high stiffness support plate ensures system stability. 5-inch high-definition touch screen, user-friendly interface, easy to operate, suitable for small flow viscous liquid transmission

Laboratory infusion pumpFeatures

1. Touch screen display: 5-inch high-definition touch screen, simple, clear, easy to understand, and easy to operate

2. Syringe selection: Major models of syringes can be selected (square syringes), and customization is supported

3. Calibration function: supports syringe calibration and stores calibration parameters

4. Parameter settings: liquid volume, flow rate, infusion time, extraction time, interval time, infusion frequency can be set and stored

5. Online speed regulation: The flow rate can be adjusted without stopping the machine during operation

6. Power on operation: Store current dynamic operating parameters when powered off, continue to operate when powered on

7. Prompt function: Real time display of available maximum flow rate; Dynamically display operating parameters

8. Reminder function: Run to the set target liquid volume, sound alarm prompt

9. External control start stop: External control level signal (5-24V) or contact signal is used to achieve start stop control

10. Communication control: RS485/USB optional, touch settings for address and baud rate

11. Status output: start stop, direction status output

technical parameters

Working mode: infusion, extraction, infusion/extraction, extraction/infusion, continuous, multiple infusion

Number of channels: 1

Maximum travel distance: 150mm

Linear thrust:>1600N

Accuracy: 1%

Repetition accuracy: 0.05%

Linear speed: 0.02um/min~20mm/min

Step resolution: 0.0156um/step

Applicable power supply: Ac90264V 50/60 Hz

Working environment: Temperature: 0-40 ℃ Humidity: 20% -80% RH No condensation

Protection level: IP31

Dimensions: 256 * 190 * 146 (mm)

Reference flow rate of syringe