Laboratory heat sealer

Product advantages：
Hot seal configuration can be single strip (top mounted) or double strip (top and bottom mounted, see standard)ASTM F2029）.

Users can easily replace the heat seal according to different surface area or surface treatment methods.

Thanks to the precise heat sealing clamping surface and jaw head guidance system, the instrument can accurately and repeatedly perform hot press sealing.

It can be widely applied to flexible materials or blister packaging protective films, blister packaging protective bags.

The calibration cycle of the HS-2 laboratory heat sealer for low-frequency maintenance is 12 months.

Technical parameters:
1. Heat sealing width: * 50mm large;
2. Temperature control: room temperature -300 ℃, accuracy: ± 0.5%, operating accuracy: ± 2 ℃; Both types of heat seal devices can be used: single strip (top mounted) or double strip (top and bottom mounted) for temperature control;
3. Automatic cycle and delay time: Delay time range: 0.1 to 99.9 seconds; Electronic processor control, which can be manually operated during the automatic cycle operation of the heat seal to ensure the correct alignment of the sample;