Laboratory Ampoule Sealing Machine

Laboratory Ampoule Sealing MachineSuitable for natural gas and liquefied petroleum gas, consisting of a control box and a sealing table, with a novel design, lightweight and beautiful appearance, simple operation, and sealing functionFast efficiency, it is the equipment for small ampoule sealing machines in various colleges, research institutions, pharmaceutical trial production rooms, hospital preparation rooms, proctology departments, laboratories, and other units.

RFJ Laboratory Ampoule Sealing Machinecharacteristic

1. The new model has no noise during operation, fast sealing speed, easy preparation and storage, and a simple overall design;

2. Compared to previous sealing machines, it is safer, more convenient, * cleaner, and very efficient;

RFJparameter

1. Applicable bottles: 1-20ml ampoules;

2. Power: 220V, 7W;

3. Gas pressure: ≥ 0.04kpa; Barometric pressure: ≥ 0.4kpa;

4. Production: 600-800 units/hour;

5. Machine size: 300 × 180 × 350mm;

6. Machine weight: 3.2kg

Precautions for RFJ operation

1. The gas cylinder and gas generation chamber must be at least 6 meters away from the working position.

2. When igniting, do not place any part of your body in front of the flame gun nozzle. When igniting the lighter, it should be located on the side of the flame gun to avoid burning your hands. When igniting, it is necessary to first close the auxiliary gas valve, and slowly open the gas valve while igniting. Adjust the appropriateness of the flame only after it has been lit.

3. The needle type regulating valve on the gas pipe and the mixing tee must be connected properly, and there must be no leakage to avoid accidents.

4. When using, attention should be paid to opening the gas needle valve and the auxiliary gas needle valve slowly and evenly, not too fast, to avoid accidents.

5. When sealing ampoules, it is important to slowly rotate the bottle until it softens. Then, use tweezers to cut the upper end and seal the bottom of the bottle.

6. This machine cannot be directly rinsed with water to avoid mechanical damage.