LTTF-1000 nuclide single/double split protective fume hood

1. The shield contains an LED touch screen control panel and is designed to integrate all operational functions, including ventilation, lighting, and dose calibration functions to streamline the operation process. And it includes dose activity display function, dose calibration measurement function (built-in activity display software), integrating the activity meter system with the self shielding system into one.

2. The size of the single box body is 1200 × 800 × 1920mm, with a large-sized design and a protective door on the side. The size of the protective door is 350 × 300mm, which facilitates the entry and exit of related items. Internal and external 304 #, 1.0mm stainless steel brushed veneer board.

3. The size of the double box is 2500 × 800 × 1920mm. The double protection ventilation cabinet is used for the distribution of radioactive nuclides such as iodine-131. The design has a front protection lead equivalent of 35 mmbp and a side and rear protection lead equivalent of 10mmb. The specific protection lead equivalent is set according to user requirements.

4. The front is equipped with a lead glass observation window and a reach out hole, forming a 30 degree angle with the bottom of the ventilation area for easy observation and use. The lead glass observation room measures 300 × 300 × 45mm and has the same protective capacity as the box, with a protective equivalent of 8mmb. The large window and high protective equivalent design make it easy to observe. It can also be customized according to user requirements.

5. Design of exhaust vents; Stainless steel lead plates with a height of 160mm on three sides are used to prevent external and internal exposure of workers due to nuclear exposure.

6. There is a 450 × 350 door opening on one side of the fume hood, equipped with a swing door of the same protective equivalent.

7. Equipped with lighting and sterilization lamps.

8. Equipped with adsorption filtration purification device (replaceable)

9. Equipped with activity meter wells, activity meter racks, manhole covers, etc.

10. Equipped with slides and pulleys.

11. Equipped with a hydraulic lift, the bottom can be equipped with an activity meter well and an electric lifting and feeding system, with a lifting range of 200mm and a specially designed lifting protective lead tank.

12. There are two 160mm diameter reach out holes below the observation window, and the edges of the reach out holes are fixed with stainless steel flanges. The diameter of the hole cover is 200mm,

The self-locking design of the reach out hole prevents staff from forgetting to close the hole and causing accidental exposure.

13. The operating room is set up with vertical laminar flow exhaust, with a ventilation capacity greater than 1.5M ²/s and a local laminar flow standard of Class 100. Rated voltage 220V, power 50w × 2 variable frequency W, noise<50db, ventilation capacity greater than 1.5M3/s Vertical ventilation and installation of high-efficiency filters to ensure that the internal environment of the hot chamber meets the International Organization for Standardization level 5 (equivalent to Federal Standard 209E100) and provides negative pressure.

14. Dual connection can meet the requirement of sharing one set of activity meters on both sides, and the specific location of the equipment at the bottom of the well can be designed separately according to the user's needs.

15. The inside and outside of the box are all made of 304 stainless steel, which is beautiful and durable.

16. The entire equipment is integrated into one piece, making it easy to install and reducing installation and maintenance time. 9. After sales requirements: free maintenance for one year, 24-hour response, and completion of training before acceptance.

One gas transmission pipeline (can install 6 transmission pipelines)