LT30-2GB Magnescale digital display

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

LT30-2GB Magnescale digital display $r $n equipped with 0.1 #181; The display resolution of m is equivalent to the highest resolution of the DK800S series of small high-precision contact digital length meters

Product Details

LT30-2GB Magnescale digital display

Equipped with a display resolution of 0.1 µ m, equivalent to the high resolution of the DK800S series of small high-precision contact digital length meters

High display resolution: 0.1 µ m
Origin detection function
Output the qualification judgment of all models. Data can be output in BCD and RS-232C formats
Small/lightweight: DIN standard (W72mm × H72mm)
Comparator function
Reset/preset function
The function of issuing an alarm when the response speed exceeds the maximum or when the measuring component is not connected correctly
Save set values
2-channel addition and subtraction method (limited to 2CH type)

Technical parameters of LT30-2GB Magnescale digital display meter

Main specifications
model		LT30-2GB	LT30-2GC
display		6-digit, backlit LCD, mode display
input	Length measurement component	2CH
	input
	I/O connector * 1	○
	BCD*2	○	–
	RS-232C*3	–	○
	RS-TRG*4	–	○
reset function		Reset button and external input (I/O connector)
		–	RS-232C command
Preset function		Set preset values through preset keys and call them through reset keys
		–	Set and call through RS-232C command
Comparator function		Use the buttons on the front panel of the 3-frame comparator to determine if the comparator value setting is qualified: LED display and I/O connector output (optocoupler)
		Four comparator values can be set (key input) and switched through the BCD terminal	Through RS-232C
			Command setting
Through RS-232C		Start measuring large, minimum, and peak to peak values through the startup input of the I/O connector/stop updating by pausing input
Command setting		–	RS-232C
			Support setting and startup
Input resolution		Choose 0.0001mm, 0.0005mm, 0.001mm, 0.005mm or 0.01mm
display resolution		Choose 0.0001mm, 0.0005mm, 0.001mm, 0.005mm or 0.01mm
direction		switchable
Origin function		Choose whether to use (if used, wait for the origin signal input while turning on the power)
High response frequency		20MHz (on the phase difference between phase A and phase B)
Harmony and difference function		A+B, A-B, and B-A can be selected by setting the direction
alarm		Speed and disconnection, etc. (displayed on LCD and all comparator outputs of I/O connectors are "H" (OFF))
		BCD alarm terminal "H" (OFF)	–
data saving		Resolution, direction, comparator value, preset value, various modes, etc
		BCD polarity forwarding speed, etc	–
Key locking function		Long press the selection key to lock/unlock
temperature range		Usage: 0-40 ℃, Storage: -10-50 ℃
Power consumption * 5		9W	8.5W
quality		About 270g	About 230g
power supply		Power input connector (3 pins): DC 9.0-26.4V
Suitable length measuring components		DK800S series, DK series
*1. I/O connector: Input: reset, peak hold start, peak hold pause, RS trigger (limited to RS-232C type)/Output: determine whether it is qualified (optocoupler)
*2 BCD (36 pin half pitch connector): Input: Reset, peak hold starts, comparison value selection (4 options)/Output: Output based on the selection of 6 bits (collector open circuit) current value/large value/minimum value/peak to peak value, alarm output
*3 RS-232C (8-pin mini DIN connector): Reset, preset value setting/calling, peak hold start, peak hold pause, current value latch, software version reading, comparison value setting, measurement mode selection and output of current value/large value/minimum value/peak to peak value, key locking and unlocking, BCD (36 pin half pitch connector) Input: Reset, peak hold start, comparison value selection (4 types)/Output: Output 5-digit (collector open circuit) current value/large value/minimum value/peak to peak value based on selection, and output alarm
*4 RS-TRG terminals: trigger input for RS-232C data output
*When connecting the length measuring component

Outline dimension diagram of LT30-2GB Magnescale digital display meter

LT30-2GB Magnescale数显表

LT30-2GB Magnescale digital display accessory

LT30

output cable

DZ252	RS-232 output D-sub 9-pin female connector (for LT series and MG series)
DZ253A	RS-232C output D-sub 25 pin parent connector (for LT series and MG series)
DZ254	RS-232C output top splitter cable (for LT series and MG series)