LS45A rotary cup flowmeter

The LS45A rotary cup flowmeter is a portable instrument that uses innovative electronic components to measure flow velocity and flow rate in a contactless manner. It is compact and beautiful in size, reliable in performance, high in sensitivity, good in sand resistance, corrosion-resistant, and requires no disassembly or cleaning. It has a wide range of flow velocity measurements and is easy to use. The measurement data can be stored, the point flow rate can be automatically calculated, and it has the characteristics of a microcomputer interface.

Specification

1. Speed measurement range: 0.015-3.5m/s

2. Working water depth: 0.05-3 meters (limited by the length of the signal line, if the water depth exceeds 6 meters, additional extension lines, sealed joints, extended measuring rods, etc. must be purchased from the factory)

3. Working temperature: -10 ℃ to+45 ℃

4. Flow rate and flow calculation: completed by a flow rate measuring instrument for direct reading

5. Relative mean square error of the entire instrument: | m | ≤ 1.8%

6. Number of signals: 1 to 4 signals

7. Hydraulic pitch of propeller: 440mm

8. Rotation diameter: Φ 60mm

Purpose:

It is an ideal instrument for measuring flow velocity in industrial wastewater discharge channels, agricultural irrigation channels, streams, rivers, and laboratories, especially suitable for measuring shallow and low flow velocity in water.

Specification

1. Speed measurement range: 0.015-3.5m/s

2. Working water depth: 0.05-3 meters (limited by the length of the signal line, if the water depth exceeds 6 meters, additional extension lines, sealed joints, extended measuring rods, etc. must be purchased from the factory)

3. Working temperature: -10 ℃ to+45 ℃

4. Flow rate and flow calculation: completed by a flow rate measuring instrument for direct reading

5. Relative mean square error of the entire instrument: | m | ≤ 1.8%

6. Number of signals: 1 to 4 signals

7. Hydraulic pitch of propeller: 440mm

8. Rotation diameter: Φ 60mm