LPS7110 Network Management Type 7+3G+4 Data Port Gigabit Embedded Low Power Industrial Ethernet Switch

NegotiableUpdate on 07/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Supports 7 10/100 base-T (X) Ethernet ports and 3 1000base-X SFP optical ports; Supports 2 power alarm inputs and 1 configurable alarm output; Supports 2 CAN and 2 UART interfaces (optional RS-232 or RS-485 module); Support comprehensive QoS policies and multiple priority queue scheduling algorithms, and support ACL access control lists; Embedded web server, which can be remotely managed and configured through a browser; Link redundancy self recovery technology based on NLK Ring technology, with a self-healing time of less than 20ms; Trunk port aggregation; Implement broadcast storm detection and control (including storm type detection such as broadcast, multicast, unknown unicast, etc.); Dynamic IGMP Snooping support, filtering multicast traffic; Online firmware upgrade, bandwidth management, and prevention of unpredictable network issues; Based on IEEE 802.1Q VLAN; Support QoS, IEEE802.1p, and AKS/DifsServe to improve communication quality; Support SNMP V1/V2C network management at different levels; Support RMON and private MIB, with effective remote data monitoring and prediction capabilities; Support port mirroring for online debugging and real-time network time synchronization; Ultra small size design, compact size, easy installation and matching; Support user secondary development, software online upgrade, and configuration file import and export functions.

Product Details

overview

The LPS7110 series products produced by Shanghai Newlink Communication Technology Co., Ltd. are independently developed and designed specifically for industrial communication network applicationsDeveloped a two-layer gigabit embedded industrial Ethernet switch. To fully consider users' requirements for the volume of embedded products, the volume of this series of productsCompact and shell free design, it can be embedded as a switching module on user circuit boards or used as a standalone switch. Simultaneously possessing richCommunication interface, this series of products provides 7 100Mbps Ethernet interfaces, 3 Gigabit SFP optical ports, and supports 2 CAN and 2 UART interfaces simultaneously(Optional RS-232 or RS-485 module) configuration model, where the optical port is a 1000Base LX full duplex single-mode or multi-mode fiber optic connectorThe port adopts SFP hot swappable devices, and the fiber interface type adopts LC interface. The electrical port is a 10/100Base-T Ethernet RJ45 port, eachRJ45 ports all have adaptive functions, supporting full duplex or half duplex modes, and can automatically perform MDI/MDI-X connections. Can meet the upgrade requirementsThe need for expansion and strong compatibility provide strong support for mine information automation

The embedded switch of Shanghai Newlink Communication Technology Co., Ltd. provides a wide range of DC power input. In terms of structural installation, LPS7110 series switchesUse industrial embedded installation. This series of products adoptsindustryChip, low-power, fanless design, power supply with reliable overcurrentReverse connection and EMC protection, suitable for intrinsically safe power supply applications. Industrial grade quality design solutions are adopted on the devices, and the products comply with industry standardsAccurate and rigorous testing, able to adapt to harsh industrial site environments, can be widely used for video surveillance and personnel positioning in large coal mines and mines,In large-scale networking sites for security monitoring and other systems.

Technical Parameter

ieee standard	802.3、802.3u、802.3z、802.3x、802.1P、802.1Q、802.1D/W
switching	Support VLAN and GVRP Supports port speed limit and storm suppression Support port aggregation Support port flow control
Redundancy technology	Support NLK Ring ring network technology Support STP/RSTP
multicast	Support IGMP v1/v2, IGMP Snooping Support GMRP and static multicast
Management and Maintenance	Support Console and WEB management methods Support SNMP v1/V2C Support unified upper computer software management
Exchange method	store and forward
backplane bandwidth	7.6Gbps
100Mbps port	Up to 7 10/100baSE TX or 100baSe FX optional port
Giga Ports	3 x 10/100/1000baSE TX or 100/1000baSe SFP interface
serial interface	2 RS232 or RS485 options, standard RS485 interface
CAN	2 CAN bus data interfaces
Electrical interface parameters	Physical interface: RJ45 with shielding or DB9, IEEE802.3 standard Ethernet port: 10/100baSe TX (100Mbps), 10/100/1000baSe TX (Gigabit) supports automatic negotiation function Transmission distance:<100 meters
Optical port parameters	Luminous power:>-12dBm (single-mode)>-17dBm (multi-mode) Receiver sensitivity:<-38dBm (single-mode)<-35dBm (multi-mode) Wavelength: 1310nm (single-mode) 1550nm (single-mode) 1310 nm (multi-mode) Transmission distance: 20-80Km (single mode)<5Km (100M multimode)<2Km (Gigabit multimode) Connector types: SC/FC/ST, LC Transmission rate: 125Mbps (100Mbps), 1.25Gbps (Gigabit)
Power supply parameters	Input voltage: DC12V, DC24V, DC48V optional Input power consumption: less than 9W Overcurrent protection: built-in
mechanical parameters	Physical dimensions (width x height x depth): 180mm x 135mm Installation method: Positioning hole installation Shell: None
work environment	Working temperature: -40 ℃~+85 ℃ Storage temperature: -40 ℃~+85 ℃ Humidity: 5%~95% (no condensation)
EMC standard	EN61000-4-2 Anti static (ESD): ± 8kV contact discharge, ± 15kV air discharge EN61000-4-3 Electromagnetic Field: 10V/m (80-1000MHz) EN61000-4-6 anti conduction: 3V (10kHz~150 kHz), 10V (150kHz~80 MHz) EN55022：EN55022 Class A

ordering information

Ordering Information
LPS7110-3GX-2C-2D-DC12	3 Gigabit+7 100Mbps+2 CAN+2 RS485, single DC12/24/48V power supply
LPS7110-3GX-1H-2C-2D-DC12	3 Gigabit+1 100M optical+6 100M electrical+2 CAN+2 RS485, single DC12/24/48V power supply
LPS7110-3GX-2H-2C-2D-DC12	3 Gigabit+2 100M optical+5 100M electrical+2 CAN+2 RS485, single DC12/24/48V power supply
LPS7110-3GX-3H-2C-2D4-DC12	3 Gigabit+3 100M optical+4 100M electrical+2 CAN+2 RS485, single DC12/24/48V power supply
LPS7110-3GX-4H-2C-2D-DC12	3 Gigabit+4 100Mbps Optical+3 100Mbps Electric+2 CAN+2 RS485, Single DC12/24/48V Power Supply
LPS7110-3GX-7H-2C-2D-DC12	3 Gigabit+7 100Mbps optical+2 CAN+2 RS485, single DC12/24/48V power supply
Order Model Description
GX represents Gigabit interface type and transmission distance	GT: Gigabit electrical port; GAS20: Gigabit LC optical port, single-mode 1310nm20km transmission distance; GAM01: Gigabit LC optical port, multimode 1310nm 500m transmission distance; The transmission distance supports 20/40/60/80km optional, and the optical port supports single fiber bidirectional optional; For example, 3GS20 represents three gigabit single-mode LC optical ports with a transmission distance of 20km
H (represents 100Mbps optical port type, followed by interface type and transmission distance) SC/FC/ST interface type optional, transmission distance supports 0-80km optional	·Fiber optic type: ·AS: 100Mbps optical port, single-mode ·AM: 100Mbps optical port, multimode ·SF: 100Mbps optical port, single-mode single fiber ·Optical fiber interface type: ·ZM: SC fiber optic interface ·RM: ST fiber optic interface ·TM: FC fiber optic interface ·The transmission distance supports 20/40/60/80km optional, and the optical port supports single fiber bidirectional optional; For example: 4AS-ZM40: 2 single-mode SC optical ports with a transmission distance of 40km
power supply	DC12: DC input single power supply DC24V DC24: DC input single power supply DC24V DC48: DC input single power supply DC48V
For example: LPS7110-3AS20-4AS-TM20-2C-2D-DC12 3 gigabit single-mode LC optical ports with a transmission distance of 20km, 4 100Mbps single-mode FC optical ports with a transmission distance of 20km, 3 100Mbps electrical ports, standard DC12V

Data Download

name
Product Introduction download