LPS5108 Industrial 8 100Mbps Port 4 Serial Port Layer 2 Embedded Network Management Ethernet Switch

NegotiableUpdate on 07/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Supports 8 optional 100Mbps optoelectronic interface configurations; 2 CAN ports, 4 RS485 serial ports; The fast fiber ring redundancy technology (NLK Ring) with less than 20ms enhances the reliability of system communication; 100base FX full duplex multimode/single-mode fiber optic interface; 10base-T/100base-TX adaptive Ethernet interface (full duplex, half duplex), supporting automatic MDI/MDI-X connections; Support port control, bandwidth control VLAN、QoS、 Rich software features such as static multicast, port mirroring, port aggregation, broadcast storm suppression, and online image upgrade; Support one click restart and one click factory reset; Support LED indication of power supply, system operation, alarm, ring network, and port connection status; -Operating temperature range of 40 ℃~85 ℃, meeting the requirements of harsh industrial environment applications; Industrial grade power input, supporting relay power failure, fiber failure, storm warning output, low-power design.

Product Details

overview

The LPS5108 series products produced by Shanghai Newlink Communication Technology Co., Ltd. are independently developed and designed specifically for industrial communication network applicationsA two-layer 100Mbps embedded industrial Ethernet switch was developed. To fully consider users' requirements for the volume of embedded products, this series of products has a small volumeCleverly designed without a casing, it can be embedded as a switching module on a user circuit board or used as a standalone switch. Simultaneously possessing rich connectivitySignal interface, this series of products provides 8 optional 100Mbps optoelectronic interfaces, as well as 4 RS485 interfaces and 2 CAN port configuration models, among which the optical port is100Base FX full duplex single-mode or multi-mode fiber optic interface, with SC, ST, and FC fiber optic interface types. The electrical port is 10/100Base-T Ethernet RJ45 port, each RJ45 port has adaptive function, supports full duplex or half duplex mode, and can automatically performMDI-X connection. It can meet the needs of upgrading and expanding, with strong compatibility, providing strong support for mine information automation, and enabling industrial developmentCommunication is smooth, reliable, and fast, meeting the continuous innovation needs of customers to improve value-added applications.

The embedded switch of Shanghai Newlink Communication Technology Co., Ltd. provides a wide range of DC power input. In terms of structural installation, the LPS5108 series switches useIndustrial embedded installation. This series of products adoptsindustryChip, low-power, fanless design, power supply with overcurrent and reverse connectionAnd EMC protection, suitable for intrinsically safe power supply applications, using industrial grade quality design solutions on devices, the product meets industry standardsStrict testing, able to adapt to harsh industrial site environments, can be widely used for video surveillance, personnel positioning, and safety in large coal mines and minesOn site large-scale networking of monitoring and other systems.

Technical Parameter

ieee standard	802.3、802.3u、802.3z、802.3x、802.1P、802.1Q、802.1D/W
switching	Support VLAN and GVRP Supports port speed limit and storm suppression Support port aggregation Support port flow control
Redundancy technology	Support NLK Ring ring network technology Support STP/RSTP
multicast	Support IGMP v1/v2, IGMP Snooping Support GMRP and static multicast
Management and Maintenance	Support Console and WEB management methods Support SNMP v1/V2C Support unified upper computer software management
Exchange method	store and forward
backplane bandwidth	2Gbps
100Mbps port	Up to 8 10/100baSE TX or 100baSe FX optional port
serial interface	4 RS232 or RS485 options, with RS485 interface as standard
CAN	2 CAN bus data interfaces
Electrical interface parameters	Physical interface: RJ-45 with shielding RJ-45 port: 10base-T/100base-TX， Support automatic negotiation function Interface standard: Compliant with IEEE802.3 standard Transmission distance: 100 meters
Optical port parameters	Luminous power:>-12dBm (single-mode)>-17dBm (multi-mode) Receiver sensitivity:<-38dBm (single-mode)<-35dBm (multi-mode) Wavelength: 1310nm (single-mode) 1550nm (single-mode) 1310nm (multimode) Transmission distance: 20-80Km optional (single-mode)<5Km (multi-mode) Connector type: SC/FC/ST Transmission rate: 155Mbps
Power supply parameters	DC power supply: 9-36VDC Input power consumption: 5.35W (@ 24V) Overcurrent protection: built-in
mechanical parameters	Physical dimensions (height x width x depth): 31mm x 180mm x 147mm (including interfaces, excluding fiber optic connectors) Installation method: Positioning hole installation Shell: None
work environment	Working temperature: -40 ℃~+85 ℃ Storage temperature: -40 ℃~+85 ℃ Humidity: 5%~95% (no condensation)
EMC standard	EN61000-4-2 Anti static (ESD): ± 8kV contact discharge, ± 15kV air discharge EN61000-4-3 Electromagnetic Field: 10V/m (80-1000MHz) EN61000-4-6 anti conduction: 3V (10kHz~150 kHz), 10V (150kHz~80 MHz) EN55022：EN55022 Class A

ordering information

Ordering Information
LPS5108-4D-2C	8 100MB+4 RS485+2 CANbus, standard single DC9-24V power supply
LPS5108-2(AS/AM)-4D-2C	2 100Mbps optical+6 100Mbps electric+4 RS485+2 CANbus, standard single DC9-24V power supply
LPS5108 -4(AS/AM)-4D-2C	4 100Mbps optical+4 100Mbps electric+4 RS485+2 CANbus, standard single DC9-24V power supply

Data Download

name
Hardware Installation Manual download
Product Introduction download