LORA wireless pressure transmitter | sensor ZYB11xx

LORA Wireless Pressure Transmitter | Sensor ZYB11xx Product Overview:

ZYB11XX is a new industrial grade transmitter product that uses 433MHz LoRa wireless self-organizing network as its core to wirelessly transmit pressure data. It supports the integration of large capacity disposable 3.6V lithium batteries or the use of external power supply; Internally integrated with a highly reliable LoRa self-organizing network communication module, the wireless transmission of pressure data compensates for the limitation of traditional pressure transmitters that can only transmit data through wired methods (RS485/232); It has simple construction, truly achieves instant installation and use, convenient maintenance in the later stage, and can replace the battery according to the cycle.

ZYB11XX has multiple ranges and can be equipped with a local digital pressure display head. Zero and range adjustments are convenient; Reverse polarity protection and current limiting protection; Resistance to lightning strikes and impacts; Intrinsically safe explosion-proof; Small size, beautiful appearance, high cost-effectiveness; High precision, high stability, and high reliability.

LORA Wireless Pressure Transmitter | Sensor ZYB11xx Product Features:

<Display pressure value on demand>-4-digit LED/LCD digital display, convenient and intuitive.

<Factory integrated large capacity lithium battery>-3.6V&9Ah large capacity lithium manganese battery (non rechargeable), if data is reported every 30 minutes, the battery can be used for up to 1.5 years.

*If you need a larger capacity battery, you can contact customer service for selection

*Support external power supply, range 5V-24V (please select the external power supply version)

——LoRa is a type of LPWAN (Low Power Wide Area Network) communication technology that has advantages such as high sensitivity, low power consumption, and large system capacity. It is very suitable for IoT applications that require low power consumption, long distance, large number of connections, and positioning and tracking. Our ZYB11XX series wireless pressure transmitter uses a 433MHz LoRa self-organizing network for wireless data transmission, which is stable and reliable.

<Supports Modbus RTU communication protocol>- Fully supports industrial configuration applications, supports access to Zhongshan IoT Cloud to provide flexible DCS, SCADA, and configuration software OPC interfaces.

<Report Operating Condition Information>- Supports reporting operating condition information such as battery voltage and signal strength.

<Customizable Settings>- Data collection, reporting cycle, and alarm methods (WeChat, SMS, phone) can be freely configured and set according to the situation to grasp the device's operating status.

<Support alarm threshold setting>

The maximum and minimum threshold values can be set. If the current data exceeds the closed value, an alarm will be immediately triggered and uploaded to the platform.

<Industrial grade quality>- impact resistance, vibration resistance, suitable for industrial sites, anti-corrosion and moisture-proof, can be directly used in outdoor environments, with a protection level of IP66.

<Obtaining Electrical Explosion proof Certificate>- In 2016, it obtained the "Electrical Equipment Explosion proof Certificate" issued by the National Explosion proof Electrical Product Quality Inspection Center. The explosion-proof version of the transmitter can be directly used in on-site scenarios with electrical explosion-proof requirements, such as gas stations, gas stations, etc.

*In scenarios with explosion-proof requirements, customers must pay attention to verifying whether the explosion-proof certification obtained by the transmitter meets the actual explosion-proof level requirements

<High Stability, High Precision>- The equipment is equipped with high-quality imported pressure-sensitive sensors and diaphragm type diffused silicon cores. It uses computer laser impedance adjustment for temperature compensation, with an annual stability of<0.1% and an accuracy of up to 0.5%.

LORA Wireless Pressure Transmitter | Sensor ZYB11xx Product Networking Introduction:

Local close range collection - This solution is suitable for use in situations where the monitoring center is close to the on-site collection point for on-site collectionThe ZYB11XX point transmits the collected interface data to the monitoring center through the LoRa network (the monitoring center's server requires an external LoRa DTU (ZSL310) to receive wireless data from the on-site collection points)

Remote collection - This solution is suitable for situations where the monitoring center is far away from the on-site collection point. The ZYB11XX at the on-site collection point transmits the collected interface data to the LoRa gateway through the LoRa network, which then transfers the data to a remote server through GPRS/4G network.

Provide monitoring center software (2.0 platform)

The platform supports querying data and receiving alarms on web pages and mobile devices.

*Only supports remote data collection solutions and needs to be used in conjunction with LoRa gateway

*Provide a 15 day free trial, please contact customer service for specific fees in the future

<2.0 Platform Web Data Statistics Chart Detail Display>

*Only supports remote data collection solutions and needs to be used in conjunction with LoRa gateway

<2.0 Platform Mobile Alarm and Data Statistics Detail Display>

*Only supports remote data collection solutions and needs to be used in conjunction with LoRa gateway

LORA Wireless Pressure Transmitter | Sensor ZYB11xx Product Appearance and Interface Display:

<Product Size>- The following dimensions are manually measured with an error of 2-3mm

LORA Wireless Pressure Transmitter | Sensor ZYB11xx Product Selection Guide:

Installation precautions:

Before installation, check if the accessories are complete and if the fasteners are loose.

2. During installation, be careful to handle with care and avoid accidental tapping or dropping. Do not open the hood on site in environments with explosion-proof requirements.

3. After installation, check if the wiring is reversed.

In order to have flexibility in use, the ZYB11XX series products use the method of configuring parameters. Users should perform appropriate parameter configuration before use.

LORA WirelessPressure transmitter | sensorZYB11xx Product User Guide:

1. Power on. The work indicator light flashes, indicating that the device has started working.

2. Connect the 485 serial port cable. Connect the computer to the device via RS485 serial port for parameter configuration or local testing.

3. Device parameter reading. On the "Parameter Settings" page, click the "Read button" in the upper right corner. All parameter values within the device can be displayed.

4. Equipment parameter settings. Click on the parameter you want to modify, then set the parameter value in the editing box or drop-down box in the upper right corner, and click the "Settings" button to complete the parameter setting; To make the new parameters effective, the device must be reset or powered on again to restart.