LORA DTU Module ZSL210

LORA DTU Module ZSL210 Product Overview:

LORA DTU module ZSL210 embedded terminal is a terminal that uses LoRa spread spectrum technology for wireless data transmission, providing users with a protocol free fully transparent data transmission mode. By setting a few simple parameters, multiple networking modes such as star networking and Mesh networking can be achieved, and there are also multiple communication modes such as on-demand, broadcast, and multicast in the same network; Provide TTL communication interface to facilitate the networking of industrial serial devices for users. The device power supply adopts a wide range low-power design (≤ 40uA@5V ）.

LORA DTU Module ZSL210 Product Features:

Anti interference and high sensitivity.

LoRa technology itself has ultra-high receiving sensitivity (RSSI) and super strong signal-to-noise ratio (SNR), coupled with our proprietary modulation and demodulation technology and stable and reliable product performance, the anti-interference ability of LoRa wireless modules is very strong.

LORA gateway

*Note: ZSL210, in conjunction with our company's 2G, 3G, and 4G DTUs, can facilitate the establishment of LoRa gateways for remote data transmission.

Automatic relay, unrestricted communication mode

Pure relay mode - In pure relay mode, the device immediately forwards data after receiving it.

Adaptive mode - serving as both a node and a relay, integrating two functions, intelligently identifying data sources, and selectively processing valid data.

Multiple network communication modes

Traditional star network - the main device can communicate with any node device.

Flexible and powerful self-organizing network

Broadcast communication - Under the same network, each device communicates with each other.

VOD communication - Under the same network, point-to-point communication can be achieved between any two devices.

Multicast communication - Under the same network, single or multiple devices can be grouped together to achieve communication between groups.

*The above three networking methods can be combined and used within the same network.

Use serial port or network configuration parameters

The ZSL210 LoRa device not only allows direct configuration of parameters using local serial port cables, but also supports wireless configuration of parameters for remote devices.

As shown in the following figure:

Device A is connected to a computer through a serial port cable, and using the graphical configuration software provided by our company, the parameters of local device A can be conveniently and quickly configured, as well as the parameters of remote device B can be configured wirelessly.

*When configuring parameters wirelessly, it is necessary to ensure that the local device and the remote device are on the same network

LORA DTU module_ZSL210 product details and accessory list: