LGSR300 high-pressure Roots blower

The LGSR300 high-pressure Roots blower is an equipment designed by Shandong Longgu Heavy Industry using advanced technology. It can be used in industries such as fertilizer, blast furnace smelting, petrochemicals, and instruments. The 300 dual stage high-pressure Roots blower is suitable for aeration and oxygenation, sewage treatment, environmental regulation equipment, and pneumatic conveying. It has low noise, reliable performance, long-term continuous operation, long-lasting performance, and compact structure. Roots blower can be used for pneumatic conveying of materials such as fly ash, rice husk, desulfurization and denitrification agents, coal powder, etc., with stable and reliable performance. In addition, Roots blower can not only be used for pneumatic conveying, but also for many other working environments.

LGSR300 high-pressure Roots blower information

Product Name: LGSR300 High Pressure Roots Fan, 300 Double Stage High Pressure Roots Fan, Roots Fan

Brand: Longgu

Usage: Low noise, reliable performance, long-term continuous operation, long-lasting performance, compact structure

Usage: Aeration and oxygenation, sewage treatment, environmental regulation equipment, pneumatic conveying

Industries: fertilizers, blast furnace smelting, petrochemicals, instruments

Advantages of LGSR300 high-pressure Roots blower

The LGSR300 high-pressure Roots blower is a blower equipment of Longgu Heavy Industry, mainly used for fertilizer, blast furnace smelting, petrochemicals, and instruments. It has low noise, reliable performance, long-term continuous operation, long-lasting performance, compact structure, and high cost-effectiveness. 300 dual stage high-pressure Roots blower can be used for aeration and oxygenation, sewage treatment, environmental regulation equipment, and pneumatic conveying. Welcome to inquire about Longgu Roots blower.

Characteristics of LGSR300 high-pressure Roots blower

The LGSR300 high-pressure Roots blower is mainly composed of a casing, wall panels, impellers, inlet and outlet mufflers, gears, bearings, seals, V-belts, couplings, pressure gauges, pressure relief valves, elastic joints, and other structures. For occasions with high noise requirements, inlet and outlet mufflers or soundproof rooms can be added according to the noise requirements. The Longgu 300 two-stage high-pressure Roots blower has the following characteristics

Fast start-up, stable operation, and can operate continuously for a long time.

The Longgu LGSR300 high-pressure Roots blower adopts a three bladed impeller rotor with small gas pulses, low fan noise, low vibration, and stable and reliable operation.

It can be used to transport air and other neutral gases, and special anti-corrosion and explosion-proof models can also be used to transport flammable, explosive or corrosive gases such as gas and hydrogen.

The fan operates stably, has a compact structure, reliable sealing, high operating efficiency, and outputs clean air.

Principle of LGSR300 high-pressure Roots blower

Product 1 is a volumetric rotary blower. This type of compressor relies on synchronous gears at the rotor shaft end to keep the two rotors in mesh. Each concave curved surface on the rotor forms a working volume with the inner wall of the cylinder. During the rotation of the rotor, gas is taken away from the intake port. When it is moved to the vicinity of the exhaust port and connected to the exhaust port, there is a sudden increase in pressure in the working volume due to the reflux of high-pressure gas. Then, the gas is transported to the exhaust channel. The two rotors do not come into contact with each other and are sealed by tightly controlled gaps, so the discharged gas is not contaminated by lubricating oil, and the operation is stable and reliable. It can be used for industries such as fertilizer, blast furnace smelting, petrochemicals, instruments, etc. for aeration and oxygenation, sewage treatment, environmental regulation equipment, pneumatic conveying, etc.

Model selection of LGSR300 high-pressure Roots blower

When selecting the model of LGSR300 high-pressure Roots blower, we need to make the following preparations

1. Understand the usage purpose of LGSR300 high-voltage Roots blower, especially to determine if there are any special circumstances, such as transporting flammable, explosive or corrosive gases, whether there are requirements for noise, and the on-site power situation;

2. For high-altitude areas, it is necessary to convert the atmospheric pressure at altitude into standard atmospheric pressure for selection;

3. Determine the required air volume, pressure performance, etc

Only by identifying these situations can we choose the appropriate specifications and models of LGSR300 high-pressure Roots blower based on these elements.

The electroplating tank is used as a gas source to optimize the quality of electroplating (uniform coating) by transporting gas inside the electrolyte layer and circulating the electrolysis.

Ozone generator, used as a gas source for high concentration ozone generators.

Cement production involves conveying air to the homogenization silo and rotary kiln shaft kiln.

Pressure machinery, used for demolding of workpieces after forming.