Double stage series three blade Roots blower

Dragon drum two-stage series Roots blower, also known as two-stage series Roots blower or two-stage Roots blower, is composed of two LGSR series standard Roots blowers of the same model connected in series. It can be used to transport air and other neutral gases, with higher pressure than a single Roots blower, and can meet the high operating efficiency requirements on site. The Longgu two-stage series Roots blower can be used in industries such as sewage treatment, petrochemicals, building materials, petrochemicals, building materials, petroleum, and mining. With a three bladed rotor structure and a special casing for air inlet and outlet design, the blower has low vibration, low noise, high temperature and wear resistance, long service life, high reliability, stable performance, and can operate continuously for a long time.

Introduction

The Longgu two-stage series three leaf Roots blower equipment is one of the commonly used equipment in metallurgy, chemical, fertilizer, petrochemical, food, building materials, petroleum, mining, textile, gas station, pneumatic conveying, sewage treatment and other industries. It is used to transport air and various neutral gases. The device consists of two three leaf Roots blowers connected in series, which has higher pressure and can meet the high pressure requirements of the site compared to a single three leaf Roots blower. The two-stage series three leaf Roots blower has higher overall efficiency, longer service life, lower noise, more stable and safe long-term operation, and has the characteristics of high volumetric efficiency, economic durability, low noise, and easy maintenance. Longgu Heavy Industry has many years of experience in designing and manufacturing two-stage series three blade Roots blower equipment, with reliable performance, stable operation, and low energy consumption. Our company's two-stage series three leaf Roots blower equipment is reasonably priced and has formed a series of products. Welcome to inquire by phone.

HD real shot

working principle

A two-stage three bladed Roots blower is a device composed of two three bladed Roots blowers connected in series. The working principle is that there are two three bladed rotors with opposite directions inside each fan case. Each three bladed rotor is supported by two bearings and a pair of high-precision synchronous gears are used to maintain the relative position of the two rotors. There is a certain gap between the three bladed rotors and between the rotor and the fan case, and they rotate without contact. The rotor is driven by the synchronous gear of the fan side box, and with the help of the meshing of the two rotors, the inlet and outlet are separated from each other, completing the process of transferring the sealed gas between the box and the rotor from the suction side to the discharge side. During the rotation process, the working chamber is compressed without internal compression. Gas moves from the inlet to the outlet. There are slight gaps between the rotors of the fan, the rotor and the box, and the rotor and the wall panel, so the friction in the working chamber of the fan is very small, and there is basically no contact wear part.

Performance Characteristics

1. Double stage series blower with high volumetric efficiency, stable operation, reliable use, and relatively stable working performance.

2. The impeller and shaft have an integral structure, and the impeller is not worn. The fan has constant performance and can operate continuously for a long time.

3. Forced gas transmission, flow rate changes very little with pressure, outlet pressure is determined by back pressure, and the transported gas is not contaminated by oil.

4. The selection of bearings is more reasonable, and the service life of each bearing is uniform. The fan oil seal is made of imported fluororubber material, which is heat-resistant and wear-resistant. The fan has a long service life and high reliability.

5. The fan has a high volume utilization rate, high volumetric efficiency, simple and compact structure, flexible installation, and is easy to use and maintain.

6. Due to the use of a three bladed rotor structure and the inlet and outlet vents of the casing, the fan has low vibration and noise. Pressure and temperature control provide protection for the operating unit.

Technical Specifications