LDCK-20 electromagnetic flowmeter from Shangzi Ninth Factory

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The LDCK-20 electromagnetic flowmeter from Shangzi Ninth Factory is a high-precision and highly reliable product that has been continuously upgraded and improved. This flowmeter has reached the highest level in excitation technology, lining technology, and intelligent technology. Suitable for measuring the volumetric flow rate of conductive media such as acid, alkali, salt solutions, mud, pulp, wastewater, etc. There are no protruding parts inside the measuring tube, so there is no additional pressure loss. Flow meters have the characteristics of measuring accuracy that is not affected by changes in physical parameters such as medium pressure, temperature, density (including solid-liquid ratio), viscosity, etc. The instrument is sensitive, has a large measurement range, strong anti-interference ability, stable zero point, and reliable operation.

Product Details

Shangziyi Ninth FactoryElectromagnetic FlowmeterLDCK-20

Product Introduction

Electromagnetic FlowmeterIt is a high-precision and high reliability product that has been continuously upgraded and improved. This flowmeter has reached the highest level in excitation technology, lining technology, and intelligent technology. Suitable for measuring the volumetric flow rate of conductive media such as acid, alkali, salt solutions, mud, pulp, wastewater, etc. There are no protruding parts inside the measuring tube, so there is no additional pressure loss. Flow meters have the characteristics of measuring accuracy that is not affected by changes in physical parameters such as medium pressure, temperature, density (including solid-liquid ratio), viscosity, etc. The instrument is sensitive, has a large measurement range, strong anti-interference ability, stable zero point, and reliable operation.

Product Features:

Electromagnetic FlowmeterProgrammable low-frequency rectangular wave excitation improves the stability of flow measurement and reduces power loss;

Reliable measurement, high accuracy, and a flow measurement range of up to 1500:1;

Full Chinese character menu operation, easy to use, simple to operate, easy to learn and understand;

It has bidirectional flow measurement and bidirectional total accumulation functions, and current and pulse have bidirectional output functions;

Capable of outputting RS485 or RS-232C digital communication signals;

The internal design of the instrument has a non power down clock that can record 16 power down times.

Main technical indicators:

Complete set accuracy:	Caliber of Φ 10-250: ± 0.5%, ± 1.0%
Complete set accuracy:	Caliber of Φ 300-1200: ± 1.0%, ± 1.5%
Dielectric conductivity:	＞20uS/cm
Output signal:	0-10mA DC or 4-20mA DC 0-lkHz pulse signal
Communication signal:	RS485 or RS-232C
Nominal pressure:	Caliber: Φ 10~50:4.0MPa
	Caliber Φ 65-125:1.6MPa
	Caliber: Φ 150-1000: 1.0MPa
	Caliber Φ 1200: 0.6MPa
Operating current	≤0.5A
Protection level:	Standard IP65, special IP67
Power supply:	～220V AC，50Hz； Or 24V DC (special order)
Connecting flange:	Machine standard JB/T81-94, national standard GB9119-2000 or according to user needs

The performance and applicable range of commonly used lining materials are shown in the table

Lining material	Main performance	Scope of application
Polytetrafluoroethylene PTFE	1. The most chemically stable material in plastics, capable of withstanding boiling hydrochloric acid, sulfuric acid, nitric acid, and aqua regia, as well as concentrated alkali and various organic solvents. 2. Poor wear resistance and adhesion performance.	1. -40℃～+180℃ 2. Strong corrosive media such as concentrated acid and alkali 3. Sanitary media
neoprene （Neoprene）	1. Has * elasticity, high tensile strength, and good wear resistance. 2. Resistant to corrosion in general low concentration acid, alkali, and salt media, but not resistant to corrosion in oxidizing media	1. <65℃ 2. Measure general water, sewage, mud, and slurry
polyurethane rubber (Polyurethane)	1. Has * wear resistance (equivalent to ten times that of natural rubber) 2. Poor acid and alkaline resistance	1. <40℃ 2. Neutral strong abrasion slurry, coal slurry, mud
Acid resistant rubber (Hard rubber)	Can withstand hydrochloric acid, acetic acid, oxalic acid, ammonia water, phosphoric acid at room temperature, as well as 50% sulfuric acid and potassium hydroxide. Avoid strong oxidants.	1. <90℃ 2. General acid, alkali, and salt solutions

例1： LDCK-100JM16MA1OOY/TBS

Description: Electromagnetic flowmeter with a nominal diameter of 100mm, lining material of polytetrafluoroethylene, electrode OCr18Ni12Mo2Ti, nominal pressure of 1.6MPa, grounding ring material OCr18Ni12Mo2Ti, output current of 4-20mA, maximum flow rate of 100m ^ 3/h, integrated installation method, with display (display: instantaneous, cumulative).

Example 2: LDCK-150LH1OMB200F/TBS

Electromagnetic flowmeter with a nominal diameter of 150mm, lining material of chloroprene rubber, electrode of Hastelloy alloy, nominal pressure of 1.0MPa, grounding ring material of OCr18Ni12Mo2Ti, output current of 0-10mA, maximum flow rate of 200m ^ 3/h, installation method of separate type, with display (display: instantaneous, cumulative).

Ordering Notice

1. The full-scale flow rate of the selected flowmeter should not be lower than the maximum actual flow rate of the measured pipeline, and the normal flow rate should exceed 50% of the selected range;

2. The output signal of the converter has two types: 0-10mA DC and 4-20mA DC, and only one can be selected. Therefore, please indicate which signal output is required when placing an order.

Shangziyi Ninth FactoryElectromagnetic FlowmeterLDCK-20

The above content is compiled and published by Shanghai Automation Instrument Factory