L100BS-EG05/L100BS-EP10 desktop waste liquid suction system

L100BS-EG05/L100BS-EP10 desktop waste liquid suction system

Product Description:

L100BSThe laboratory vacuum suction pump is used for extracting supernatant after centrifugation in the laboratory, extracting cell culture medium waste liquid, or extracting residual liquid and sediment after other experiments. Fully equipped, including an oil-free suction vacuum pump that can be plugged in, a waste liquid bottle, a hose, a vacuum pump protector, and a suction head that can be used with a tip gun. At the same time, in order to facilitate customers to suction deeper culture bottles or 96 well plates, longer stainless steel suction heads or 8-way suction heads can also be selected. The vacuum pump for liquid suction is compact in size, low in noise, and comes with a 2-year free warranty service.

The suffix represents different configurations of liquid absorbing bottles:

• EG05: Corresponding500ml borosilicate glass suction bottle(Glass, abbreviated as G)

• EP100: Corresponding1000ml plastic suction bottle(Plastic, abbreviated as P)

application fieldSuitable for suction of laboratory liquids, such as culture medium waste liquid, centrifuge tube supernatant, etc.

Product Features:

1L100BS-EG05 (500ml glass suction bottle version)

advantageGlass material is corrosion-resistant, easy to clean, reusable, and meets the requirements of a clean laboratory.

• Liquid suction bottle design500ml borosilicate glass material, transparent and visible, easy to observe the amount and status of waste liquid, high temperature resistance and high-pressure sterilization.

• Applicable scenariosLaboratory routine waste liquid suction, cell culture supernatant suction, and small-scale sample filtration; Suitable for scenarios that require high visualization of waste liquids and sterilization.

2. L100BS-EP100 (1000ml plastic suction bottle version)

• advantagePlastic bottle body is lightweight and durable, with lower cost, suitable for daily collection of large amounts of waste liquid.

• Liquid suction bottle design1000ml polypropylene (PP) plastic material, resistant to falling and shattering, with a large capacity design to reduce frequent dumping of waste liquids.

• Applicable scenariosHigh throughput waste liquid treatment, teaching laboratory, industrial small-scale waste liquid collection; Suitable for scenarios that require safety (anti breakage) and large capacity.

Product Technical Parameters:

Product configuration:

1 host, 1 set of centrifuge tube placement bracket, 1 handheld operator with switch, single suction head (can be quickly retracted)Tip Head）1 piece, eight suction heads (can be quickly retracted)Tip Head）1 piece1 drip tray1 liquid recycling bottle, 1 two hole suction bottle cap, 2 meters of suction hose, 1 water blocking filterPump tube section 1Replace one set of spare parts for the operator.

L100BS-EG05/L100BS-EP10 desktop waste liquid suction system

Related Products