DTVS-300P4D laboratory desktop multi-purpose suction vacuum pump

DTVS-300P4D laboratory desktop multi-purpose suction vacuum pump

Product Application

The laboratory liquid recovery suction negative pressure vacuum pump system can be used in conjunction with various equipment or experimental instruments and devices to provide vacuum suction. The generated negative pressure difference can suck out the waste liquid generated during equipment use or experimental processes, and collect it in the waste liquid bottle on the machine for temporary storage for subsequent processing. The body shell is made of all stainless steel material, paired with a 4000ml large capacity polypropylene plastic vacuum suction bottle. At the same time, to ensure safe use, three anti reverse suction protections are configured, and the entire machine comes with a three-year warranty.

Application field: This system is equipped with various experimental equipment and devices to generate negative pressure suction, which sucks the liquid generated during use into a vacuum collection bottle for storage.

Product Features:

1. Using the principle of negative pressure vacuum suction,DTVS-204P4ESuck away the air inside the collection bottle and vacuum pipeline to generate negative pressure, allowing the liquid generated during the use of equipment and devices to flow into the collection bottle.

2. Built in oil-free vacuum suction pump, with low noise and vibration during operation, no need to add pump oil or water or other working media, and no oil mist pollution will be generated during use. Daily use also does not require maintenance work for medium replacement, making it more worry free.

3. The body shell and waste liquid bottle placement machine are all made of stainless steel material, which has better corrosion resistance, a smooth surface that is easy to clean and wipe, and is sturdy and durable.

4. The waste liquid bottle has a capacity of 4L and can hold more liquids; At the same time, the bottom of the waste liquid bottle is equipped with a quick discharge port. After the liquid is full, there is no need to stop working and open the lid to pour out the waste liquid. Simply open the discharge pipe fixture and the liquid inside the bottle can be discharged while using it.

5. The waste liquid bottle is marked with a scale line, with one mark per 100ml. It is injection molded into one mold with the body of the waste liquid bottle. Even after long-term use and suction of various solutions and solvents, there will be no fading or disappearance of printed fonts that are prone to occur.

6. The newly designed front and rear distributed heat dissipation structure, combined with side air ducts, can operate for a long time without causing the surface of the body to overheat.

7. Standard regulating valve, knob type adjustment, easy to operate, can change suction and suction speed according to actual needs, to meet the needs of different occasions.

8. Triple anti waste liquid backflow protection: The collection bottle is equipped with a float ball valve, and when the liquid is full, the top of the float ball closes the suction port to prevent a large amount of liquid from overflowing from the bottle; The connecting pipeline between the collection bottle and the host is equipped with a water blocking protector, which can block the backflow of liquid under normal use; The host is equipped with a buffer cup containing a PP filter element at the inlet, which can filter out and collect moisture in the air.

Product Parameters:

productconfiguration

One stainless steel oil-free suction pump host (including one set of vacuum regulating valves)

1 set of buffer cups with PP filter element

1 4L vacuum suction bottle with bottom drain port

Floating ball valve check valve 1 set

1 set of pressure resistant pump tubing

2 water blocking protectors

2 meters of suction connection tube

One set of bottom drain pipes with fixtures

DTVS-300P4D laboratory desktop multi-purpose suction vacuum pump