Kewill flowmeter authorized general agent in Xinjiang, Germany

Kewill flowmeter authorized general agent in Xinjiang, Germany
Agent * Kewill FE10 series electromagnetic flowmeter
German Kewill flowmeter principle structure, Kewill Kewill transmitter Lanzhou first level agent
Technical characteristics of Kewill flow sensor, Kewill Urumqi office in Germany, and sales quotation from Kewill flowmeter manufacturer

The German Kewill intelligent electromagnetic flowmeter is an electromagnetic induction flow meter composed of sensors and intelligent signal converters. It can measure the volumetric flow rate of various conductive liquids, including highly corrosive liquids such as acids, alkalis, salts, as well as conductive liquids such as raw water, cooling water, and solid-liquid two-phase liquids. The flow sensor has no obstruction or pressure loss in the measuring pipeline. Kewell Kewill can measure conductive liquid media normally as long as the lining and electrode materials are selected reasonably, without being affected by changes in fluid density, viscosity, temperature, pressure, and conductivity, resulting in high measurement accuracy.

Application field of Kewill flowmeter in Germany: Shanghai Pengsheng Industrial Co., Ltd
Applied to industries such as petrochemicals, steel, electricity, metallurgy, textiles, food, pharmaceuticals, papermaking, as well as municipal environmental protection, water conservancy, and other fields
Technical Specifications
● nominal diameter (mm) pipe type PTFE lining: DN10~DN600 (DN2DN3DN6DN8 optional)
Special specifications can be customized with pipeline rubber lining: DN40~DN1200
Flow direction: positive, negative, net flow
Range ratio: 150:1
Repetitive error: ± 0.1% of the measured value
Accuracy level: 0.2 level&0.5% level
Temperature of the tested medium: ordinary rubber lining: -20 to+60 ℃
PTFE lining: -30 to+100 ℃
High temperature PTFE lining: -20 to+180 ℃
Rated working pressure: (high pressure can be customized) DN10- DN80: ≤ 2.5MPa
DN80－DN150：≤1.6MPa
DN200－DN1200：≤1.0MPa

● Flow rate range: 0.1-15m/s
● Conductivity range: The conductivity of the measured fluid is ≥ 5 μ s/cm
Current output: Load resistance 0-10mA: 0-1.5k Ω
4～20mA：0～750 Kω
Digital frequency output: The upper limit of the output frequency can be set within 1-5000Hz with a transistor collector open circuit bidirectional output with photoelectric isolation. When the external power supply is ≤ 35V and conducting, the collector current is 250mA
Power supply: AC220V, DC24V or 3.6V battery
Total power consumption: less than 20W
● Connection method: Flange connection is used between the flowmeter and the piping
Relative temperature: 5% to 95%
Protection level: IP65 (specially customized IP68)
● Environmental temperature: minus 25 to plus 60 ℃
Require the length of the straight pipe section to be ≥ 5DN upstream and ≥ 2DN downstream
Kewill flowmeter authorized general agent in Xinjiang, Germany