KV1000D Automatic Tube Folding Kinematic Viscometer

The KV1000D automatic folding tube kinematic viscometer has accurate data, complete functions, and easy operation. It can quickly replace the viscometer without draining the oil bath, and can directly measure the kinematic viscosity of various transparent and opaque Newtonian liquids such as new oil and in use oil at multiple temperatures.

KV1000DautomaticFoldable tube typeKinematic viscosity meterComposed of two independent KV1000 measurement units, they can be set to different temperatures for synchronous testing. Each measuring unit adopts a single channel standard folded tube glass capillary viscometer，passDistributed HeatingPrecision oilBath achieves viscosityplanFast constant temperature,instrumentIt integrates high-precision temperature control system, high-precision measurement system, and efficient automatic cleaning system, mainly used for rapid laboratory testing and instrumentationAccurate dataFully functional and easy to operate,Can quickly replace the viscometer without draining the oil bath,It can quickly and directly measure the kinematic viscosity of various new oils, in use oils, and other transparent and opaque Newtonian liquids at multiple temperatures.

KV1000D Automatic Tube Folding Kinematic Viscometerperformance metrics

According to the standards: ASTM D7279, D445, D446, NB/SH/T 0956-2017, T/CEC 127-2016, the measurement results meet and exceed the requirements of GB/T265 standard.

Measurement range: 0.3-6000mm2/s, with a single viscosity tube measuring a span of 10 times.

Bath capacity:4.5 L（1）

Sample dosage: 0.3-1 mL

Temperature control range:20-100 ℃ (if the target temperature is below 40 ℃, an additional cooler needs to be prepared)

Temperature control accuracy: ± 001℃

Timing accuracy: ± 0.01S

Repeatability:≤0.68%

Whole machine power:≤450W（1）

Host size:Long 210Width 450High 460( mm)（1）

working environment

Working power supply:AC220V±10% 50Hz±10%

Environmental temperature: 10-28 ℃

Relative humidity:<80% RH

Other: There is no strong vibration, airflow, strong electromagnetic interference, or corrosive gas around the laboratory.

Instrument Features

1. Fast measurement speed.non-standardpatterncan15The results are usually obtained within 3 minutes, and the entire process of injection, measurement, cleaning, drying, and result calculation generally takes no more than 3 minutes7minute

2. High degree of automation. Measurement, cleaning, drying, and result calculation are all automatically completed.

3. There are many types of samples for measurement. It can measure transparent and opaque samples, including Newtonian liquids such as gasoline, diesel, kerosene, cutting fluid, heat transfer oil, additives, lubricating oil, and in use oil.

4. Fully automatic cleaning, fast cleaning, and low cleaning cost. A cleaning process generally consumes no more than 10 milliliters of cleaning solution.

5. Multiple auxiliary functions. Includes: constant calibration, temperature calibration, internal clock timing verification, automatic calculation of viscosity index.

6Rich alarm and protection functions. include:overtemperaturealarm、Bubble alarm, pollution alarm, blockage alarmDual over temperature protection for software and hardwarePhysical protection against dry burning.

7adoptDistributed HeatingPrecision oilbath，constant temperaturefast speed，risedropThe temperature rate is5℃/min左右.

8. Adopting PT1000High precision temperature sensor.

9ViscometerEasy to replace, canquick replacement，No need to empty the oil bath.

10、It has eleven self diagnostic functions.

11. Equipped with video monitoring function and optional micro camera for real-time monitoring of instrument operation status.

12. Can store eight sets of viscometer constants.

13. It has multiple networking methods, can export data, and can connect to management systems.

14. Configurable customized upper computer management software for device management and data analysis.