KV1000 automatic tube bending kinematic viscosity meter

The KV1000 automatic tube bending kinematic viscometer has accurate data, complete functions, and easy operation. It can quickly replace the viscometer without draining the oil bath, and can directly measure the kinematic viscosity of various transparent and opaque Newtonian liquids such as new oil and in use oil at multiple temperatures.

KV1000 automatic tube bending kinematic viscosity meterAdopting a single channel standard folded tube glass capillary viscometer, rapid constant temperature of the viscometer is achieved through a distributed heating precision oil bath. The instrument integrates a high-precision temperature control system, high-precision measurement system, and efficient automatic cleaning system, mainly used for rapid laboratory testing. The instrument data is accurate, the functions are complete, and the operation is simple. The viscometer can be quickly replaced without emptying the oil bath, and the kinematic viscosity of various transparent and opaque Newtonian liquids such as new oil and in use oil can be quickly and directly measured at multiple temperatures.

KV1000 automatic tube bending kinematic viscosity meterperformance metrics

According to the standards: ASTM D7279, D445, D446, NB/SH/T 0956-2017, T/CEC 127-2016, the measurement results meet and exceed the requirements of GB/T265 standard.

Measurement range: 0.3-6000mm2/s, with a single viscosity tube measuring a span of 10 times.

Bath capacity: 4.5 L

Sample dosage: 0.3-1 mL

Temperature control range: 20-100 ℃ (if the target temperature is below 40 ℃, an additional cooler needs to be prepared)

Temperature control accuracy: ± 0.01 ℃

Timing accuracy: ± 0.01S

Repeatability: ≤ 0.68%

Whole machine power: ≤ 450W

Host size: Length 210 x Width 450 x Height 460 (mm)

working environment

Working power supply: AC220V ± 10% 50Hz ± 10%

Environmental temperature: 10-28 ℃

Relative humidity:<80% RH

Other: There is no strong vibration, airflow, strong electromagnetic interference, or corrosive gas around the laboratory.

Instrument Features

1. Fast measurement speed. The non-standard mode can produce results in 15 seconds, usually within 3 minutes. The entire process of injection, measurement, cleaning, drying, and result calculation generally takes no more than 7 minutes.

2. High degree of automation. Measurement, cleaning, drying, and result calculation are all automatically completed.

3. There are many types of samples for measurement. It can measure transparent and opaque samples, including Newtonian liquids such as gasoline, diesel, kerosene, cutting fluid, heat transfer oil, additives, lubricating oil, and in use oil.

4. Fully automatic cleaning, fast cleaning, and low cleaning cost. A cleaning process generally consumes no more than 10 milliliters of cleaning solution.

5. Multiple auxiliary functions. Includes constant calibration, temperature calibration, internal clock timing verification, and automatic calculation of viscosity index.

6. Rich alarm and protection functions. Includes: over temperature alarm, bubble alarm, pollution alarm, blockage alarm, dual over temperature protection for software and hardware, and physical protection against dry burning.

7. Adopting a precision oil bath with distributed heating, the constant temperature speed is fast, and the temperature rise and fall rate is about 5 ℃/minute.

8. Adopting PT1000 high-precision temperature sensor.

9. The viscosity meter is easy to replace, can be quickly replaced, and does not require draining the oil bath.

10. It has eleven self diagnostic functions.

11. Equipped with video monitoring function and optional micro camera for real-time monitoring of instrument operation status.

12. Can store eight sets of viscometer constants.

13. It has multiple networking methods, can export data, and can connect to management systems.