KS-4A type furnace front molten iron quality management instrument

KS-4A type furnace front molten iron quality management instrument

Main technical parameters:

Instrument Introduction

Used for rapid determination of carbon equivalent of gray cast iron and ductile iron molten iron in front of the furnace（CEL）Carbon content（C%）Silicon content（Si%）Manganese content（Mn%）； Predict the tensile strength of ordinary gray cast iron, etc. Non professionals can operate with simple training; There are multiple testing lines (i.e. material or product names, which users can add according to the actual situation of our company), and selecting appropriate testing lines for different grades of molten iron and the actual situation of each factory can make the testing results more accurate.

Technical Parameter

Description of key characteristics of the instrument:

major function

1Carbon（C%）Silicon（Si%）Manganese（Mn%）And carbon equivalent（CEL）Measurement;

2Predicting the tensile strength and hardness of gray cast iron;

3Measure the tensile strength and hardness of gray cast iron after inoculation, and predict the inoculation effect;

4After the composition determination is completed, the system automatically calculates the adjusted addition amount of the alloy based on the target values of carbon, silicon, and manganese content pre-set by the user;

5Automatic saving of measurement results;

6Can reproduce historical cooling curves and measurement results at any time;

7Measurement data can be output toEXCEL,For the convenience of data analysis, it can also be done throughUSBCopy the measured data from the interface to the office computer for storage and analysis;

8Provide powerful and easy-to-use ingredient calculation software as a gift.