KRAUS NAIMER conversion switch

The Kauls and Lanmer Group was founded in Vienna, Austria in 1907 by Franz Kauls and Lorenz Lanmer, and is a low-voltage switch that switches multiple circuits. Multiple moving contacts are stacked and welded on the shaft, and when the shaft rotates, the moving contacts are sequentially connected or disconnected from the stationary contacts to switch the circuit. Electrical appliances that switch circuits from one set of connections to another.

KRAUS NAIMER conversion switchThere are two types: discrete and integrated Also known as a combination switch, it operates differently from a knife switch as it is a planar operation that rotates left and right. It has the advantages of multiple contacts, multiple positions, small size, reliable performance, easy operation, and flexible installation. It is commonly used as a power supply introduction switch in the electrical control circuit of machine tools, playing a role in isolating the power supply. It can also be used as a control switch to directly control the infrequent start and stop of small capacity asynchronous motors. There are also unipolar, bipolar, and tri polar. It is a switching device that can be used for converting two or more power sources or loads.

Composed of multiple contacts, it is commonly used in electrical equipment for non frequent circuit connection and disconnection, power and load connection, measurement of three-phase voltage, and control of forward and reverse rotation and star delta starting of small capacity asynchronous motors. These components are fastened together as a whole with bolts.

The contact system consists of several static contact seats embedded in an insulating shell and moving contacts in a movable bracket. The moving contact is a double break docking type contact bridge, which rotates to different positions along with the shaft attached with a handle to connect or disconnect the circuit. The positioning mechanism adopts a roller card ratchet structure, equipped with different limit pieces, which can obtain switches of different gears. Assembled from multiple layers of insulating shells, it can be arranged in three dimensions, reducing installation area, with a simple and compact structure, and safe and reliable operation. Switches with different connection methods can be formed according to the requirements of the circuit to meet the needs of different circuits.

In control and measurement systems, circuit conversion is used. For example, the switching of power supply for electrical equipment, the forward and reverse switching of electric motors, and the switching of voltage and current in measurement circuits. Replacing the knife switch not only simplifies the control or measurement circuit, but also avoids operational errors and reduces the number of components used.

KRAUS NAIMER conversion switch

Yisa touch screen VT555W00000

VIPA module 208-1DP00

VIPA module 215-2BP01

Jiale Solid State Relay RA2425-D06S10

VIPA CPU 112-4BH02

Jiale Solid State Relay RJ1B60D20U

Jiale Solid State Relay RM1A60D100

Fuji frequency converter FRN0.4G1S-4C

Jiale Solid State Relay RM1A23A25C

ABB lightning arrester MWK44

ABB lightning arrester MWK44

Jiale intermediate relay RMIA210230VAC

Jiale limit switch PS21M-US11PR-M0L

Jiale limit switch PC50CNR10RP

Jiale Soft Starter RSE4003-B

Ferrer sliding contact line KBSL 4/60-4 Hs

Jiale Relay PUA 01CB48500

Jiale Soft Starter RSE4003-B

Farrer carbon brush KDS2/40

ABB relay CM-ENS, 1c/o, 5-100k, 220-240VAC

Emerson frequency converter TD3200 0.2kw

Emerson frequency converter EV3200 0.2kw

Huipeng CPU 315-4NE12

Jiale Solid State Relay RJ1P48I30E

Jiale Inductive Proximity Switch IA30DSN15NO