KL-3120X Fluorescence Sulfur Content Tester

KL-3120X Fluorescence Sulfur Content TesterTechnical Specifications

1. Sulfur measurement range: 0.005% to 5%;

2. Repeatability (r):<0.02894 (S+0.1691);

Typical value: Sample with 1% sulfur content, measurement time of 90 seconds, repeated 3 times, r≤0.02%

3. Reproducibility (R):<0.1215 (S+0.05555);

Typical value: Sample with 1% sulfur content, measurement time of 90 seconds, repeated 3 times, R≤0.05%

4. Detection limit: 10ppm

5. Oil quantity: 3ml~5ml; Powder sample: 3 grams

6. Measurement time: 30, 60, 90, 120, 150 seconds, any setting

7. Single sample automatic measurement, providing the average and standard deviation at the end of the measurement

8. Number of calibration curves: The instrument can access 10 calibration curves

9. Environmental temperature: 5 ℃~40 ℃

10. Relative humidity: ≤ 85%

11. Power supply: AC220V ± 20V, 50Hz/60hz, rated power: 50W

12. Size and weight: length 460mm x width 260mm x height 260mm; 11kg

KL-3120X Fluorescence Sulfur Content TesterInstrument Features

1. The instrument is designed with an integrated mechanical and electrical microcomputer, which is simple and beautiful.

2. Wide variety of detection, wide detection range, fast analysis speed, and low consumption of standard samples.

3. Using the fluorescence intensity ratio relative comparison analysis method, temperature and atmospheric pressure are automatically corrected, and the carbon hydrogen ratio (C/H) can also be corrected.

4. IPS 8-inch capacitive touch screen, high brightness, clear visibility under sunlight, adjustable brightness; The software interface is clear and friendly, with simple operation.

5. Determine the working status and electrical parameters of the instrument through reference sample counting measurement and energy spectrum measurement.

6. The instrument has a standard serial communication RS-232C interface, and content data, counting data, and calibration data can all be uploaded to the computer.

7. Using disposable single-sided Mylar film sample cups can avoid cross contamination; The sample cup is made using multifunctional pressing parts, which are fast and convenient. The cup cover has air holes and can record the sample number S%(m/m)、 date

8. The sample loading platform is placed on the slide rail platform, with very precise positioning.

9. The instrument has a large data storage capacity, and the content analysis results and calibration curve parameters can be checked.

10. The oil leakage is tightly protected, and the sample cup is placed on the leak proof component. It is only moved to the measurement position during sample analysis.

11. Safe X-ray protection measures: There are strict protective measures around the detection system of the instrument to prevent X-ray leakage, and there is no X-ray ionizing radiation harm to individuals and groups.

Shanghai Yutong Instrument Factory mainly engages in oil product analysis instruments, such as kinematic viscosity tester, flash point tester, trace moisture tester, oil contamination tester, acid value tester, demulsification tester, foam characteristic tester, pour point tester, oxidation stability tester, density tester, spontaneous ignition point tester, insulation oil withstand voltage tester, distillation range tester, chlorine content tester, trace carbon residue tester, apparent viscosity tester, mechanical impurity tester, freezing point tester, water quality analyzer and other laboratory instruments, with a wide range of varieties and models. Welcome to your consultation.