KAL-8 Online Lubricating Oil Tester

KAL-8 Online Lubricating Oil TesterTechnical Specifications:

Execution standards: GB/T21540, ISO4402, GB/T18854, etc

Light source: semiconductor laser

Flow rate range: 20-150mL/min

Test sample viscosity: ≤ 320cSt

Online pressure detection: 0.1-0.5Mpa (with optional pressure reducing device, the maximum pressure can reach 40Mpa)

Particle size range: 1-500 μ m (using different types of sensors)

Interface: USB interface, RS485 interface

Data storage: Provides 1000 sets of data storage space and supports USB storage

Sensitivity: 1 μ m or 4 μ m (c)

Limit coincidence error: 10000 particles/ml

Counting volume: 1-999ml

Counting accuracy: ± 0.5 pollution level

Protection level: IP56

Test interval: 1-24 hours

Test sample temperature: 0-80 ℃

Working temperature: -20-60 ℃

Power supply: AC 220V ± 10%, 50/60Hz or DC12-40V

KAL-8 Online Lubricating Oil TesterFeatures:

Using the principle of photoresist (shading) method and high-precision laser sensor, it has small size, high accuracy, and stable performance

Suitable for on-site online detection, capable of real-time monitoring of particle contamination in oil systems

Built in data analysis system, capable of displaying real data of particle size in each channel and automatically determining sample grade

Optional pressure reducing device for online high-pressure measurement with volume flushing and flushing modes, convenient for users to use the equipment, clean and maintain the instrument

Built in particle pollution level standards such as ISO4406, NAS1638, SAE4095, GJB420A, GJB420B, Г OCT17216, GB/T14039, etc

Any alarm level can be set to achieve pollution or cleanliness detection with light alarms,

RS232 or RS485 interface, can be connected to computers or other devices for data monitoring and processing

An optional 4G remote communication module can be added to enable remote monitoring of online web pages and mobile software, allowing for viewing of historical data and curves.

Ultra large storage, can be stored inside the instrument or on external storage devices

An optional oil micro moisture sensor can be selected to detect moisture saturation and PPM value.

It is possible to obtain a calibration certificate and a verification certificate for the first level particle size detection station in the national defense industry through selection and matching.

Durable exterior structure, suitable for complex working environments.