Welcome Customer !

Membership

Help

Jinhu Ouwang Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Jinhu Ouwang Technology Co., Ltd

  • E-mail

    jhowkj@163.com

  • Phone

    15952326780

  • Address

    No. 48-11 Jinhu Road, Jinhu County, Jiangsu Province

Contact Now

K series RF admittance level controller

NegotiableUpdate on 07/11
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

1、 Overview and Application: The K series RF admittance controller adopts advanced international technology. The controller consists of two parts: electronic circuit and probe. The electronic circuit includes a high-frequency oscillator, detection circuit, and output circuit. The probe consists of a detection rod and a protective cover, which are insulated from each other and from the grounding container. The high-frequency oscillator provides stable RF voltage, which is transmitted to the detection rod. When the material touches the detection rod, an unbalanced voltage is output. After being processed by a demodulator and amplifier, the relay is driven to act

Product Details



1、 Overview and Application:
KThe series RF admittance controller adopts advanced international technology. The controller consists of two parts: electronic circuit and probe. The electronic circuit includes a high-frequency oscillator, detection circuit, and output circuit. The probe consists of a detection rod and a protective cover, which are insulated from each other and from the grounding container. The high-frequency oscillator provides stable RF voltage, which is transmitted toOn the detection rod, when the material touches the detection rod, an unbalanced voltage is output, which is processed by the demodulator and amplifier to drive the relay to act.
Alarm and control of material level and liquid level in metallurgy, chemical industry, petroleum, power, food, papermaking, coal, building materials, medicine and other fieldsInterface measurement between two different liquids, such as oil-water interface
2、 Product Features:
Calibration is simple and fast
● Stable product performance
Various models have strong universality and wide applicability
● Easy installation and beautiful appearance
● Can be combined withPLCProgrammable controller orDCSDistributed control system is used in conjunction to achieve automatic control and detection of the production process
3、 Technical parameters:
Power Supply:AC220V+10% 50HZDC24V
Signal output: Two sets of normally open and normally closed contacts
Environmental temperature:-40~85
Temperature impact:0.1PF/20
Sensitivity:0.3PF
Electrical interface:M20×1.5
Contact capacity:AC220VDC24V 3A
Shell: Standard cast aluminum shell
Explosion proof grade:ExdibCT5
Probe material: stainless steel, polytetrafluoroethylene, engineering plastic, ceramic
Protection level:IP66



Technical Parameter
model
standardOW-62KA
Cable typeOW-62KB
Flat typeOW-62KC
picture
power supply
AC220V+10% 50Hz; DC24V
signal output
Two sets of normally open and normally closed contacts
ambient temperature
4085
Temperature influence
0.1PF/20
repeatability
≤+1.6mm
sensitivity
0.3PF
outlet
M20×1.5
CONTACT CAPACITY
AC220V 5A; DC24V 3A
casing
Standard cast aluminum shell
Explosion proof grade
ExdibCT5
Probe rod material
Stainless steel, polytetrafluoroethylene, engineering plastics, ceramics
protection grade
IP66
4、 Product selection
enterprise standard
Separation line
model
Power supply mode
controller
delayed
Separation line
structural style
probe
Temperature and pressure
standard installation
Diameter/Warm Material Part Material
Standard CSL
length
explanatory note
Separation line
Shell form
Probe length
describe
OW
enterprise standard
62K/A/B/C
undefined
1
RF admittance controller
2
110VAC
3
24VDC
1
220VAC
2
Ordinary controller
0
High sensitivity controller
1
No delay
With delay
1
undefined
2
Integral
01
121
13.8kg
3/4″
NPT
9.5mm/316ssAnd epoxy resin
3.5Or 10 inches
18Or 36 inches
One injection molding without leakage
split type
02
149
3.5kg
3/4″
NPT
9.5mm/316ssAnd TFE
3.5Or 10
18Or 36
03
121
0kg
11/2″
chuck
9.5mm/316ssAnd TFE
3.5Or 10
18Or 36
3A(Hygiene) standards
07
232
13.8kg
3//4″
NPT
9.5mm/316ssAnd T1
3.5Or 10
18Or 36
One injection molding without leakage
12
149
20.7kg
3//4″
NPT
9.5mm/316ssAnd TFE
3.5Or 10
18Or 36
High voltage resistance
18
147
3.5kg
3//4″
NPT
9.5mm/PFA
3.5Or 10
18Or 36
corrosion preventive
N
800
64kg
Maximum length of 3.4 meters
Specially customized sensors for special applications
undefined
G
Common
B
Explosion proof type
OW
62K/A/B/C
1
2
0
1
18
B
Complete selection