Jutong spray dryer adopts bipolar cyclone separation and recovery system

Jutong spray dryer adopts bipolar cyclone separation and recovery system

Product description of two-stage recovery small spray dryer:

Two stage recovery small spray dryer（8000S）Mainly suitable for the production of trace particle powders in universities, research institutes, and laboratories of food, pharmaceutical, and chemical enterprises, it has broad-spectrum applicability to all solutions such as emulsions and suspensions,Suitable for drying heat sensitive substances such as biological products, biopharmaceuticals, enzyme preparations, etc., as the sprayed material only experiences high temperature when sprayed into mist like particles, it is only instantly heated and can maintain the active ingredients of these active materials without damage after drying.

Main features of two-stage recovery small spray dryer:

1.This product adopts a bipolar cyclone separation and recovery system, which improves the recovery rate of the product.

2.Equipped with a large color touch screen for operation and built-in memory function.

3.Full automatic control: one button startup, after setting the spray process parameters, the touch screen displays the running animation, and the running process is clearly displayed; When shutting down, simply press the stop button and the machine will automatically shut down safely.

4.Manual control: If it is necessary to adjust the process parameters during the experiment, it can be easily switched to manual mode, and the entire experiment process is dynamically displayed on the color touch screen (animation).

5.Shutdown protection function: When shutting down, simply press the stop button, and the machine will stop running except for the fan. The equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).

6.The spray, drying and collection system is made of transparent high borosilicate heat-resistant glass material, which makes the spray drying process in a pollution-free and stable environment, and makes the entire spray drying experiment process directly observable, providing convenience for scientific researchers to control the experiment process and results,And be able to discover and solve problems in a timely manner. All glass components are easy to disassemble and clean.

7.Built in oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with excellent fluidity and very low noise, less than60dbMeets laboratory noise standards;

8.The atomization structure of two fluid spray, the whole machine is made of stainless steel materials, compact design, no auxiliary equipment, easy to use, as new as ever.

9.In order to meet the requirements of users to adjust various parameters within the experimental range, real-time control is adopted in the design of drying temperature controlPIDConstant temperature control technology ensures accurate temperature control throughout the entire temperature range and precise heating temperature control±1℃.

10.The feeding amount can be adjusted by the feeding peristaltic pump, and the small sample volume can reach300mlMagnetic stirrer is optional

11.The dried finished powder has a relatively uniform particle size,95%The above dry powders are within the same particle size range.

12.For viscous materials, the small spray dryer is equipped with a nozzle cleaner (through needle), which will automatically clear when the nozzle is blocked, and the frequency of through needle can be automatically adjusted;

Technical parameters of two-stage recovery small spray dryer:

1.The entire experimental process of this product is dynamically displayed on the color touch screen (animation)

2.Inlet air temperature control:30℃～300℃

3.Air outlet temperature control:30℃～200℃

4.Evaporation water volume:1500mL/H～2000ml/h

5.Large feed volume: The peristaltic pump can be adjusted to a larger capacity2000ml/h

6.Small feed quantity:300mL

7.real-timePIDTemperature control technology, real-time online display of inlet and outlet air temperatures, temperature control accuracy±0.5℃

8.Drying time:0.8～1.0S

10.The machine has a misoperation protection function. When the fan and heater switches are used in the wrong order, the machine automatically reminds to prevent novice operators from accidentally damaging the machine.

11.The two-stage recovery small spray dryer has the shutdown protection function: when shutting down, just press the stop button, the machine will stop running immediately except for the fan, and the equipment will not burn out the heating part due to misoperation (forced shutdown of the fan).

12.colorfulLCDTouchscreen parameter display: inlet temperature/Air outlet temperature/Peristaltic pump speed/Needle frequency

13.Nozzle diameter:0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mmOptional and customizable according to requirements

14.Time setting function: Users can set the working time of the machine themselves, and the machine will stop working at the end of the working time without manual supervision, saving valuable time for customers to conduct experiments.

15.Fan automatic stop function: After the instrument finishes working, the fan should be kept in working state for the glass part to cool down. This machine is set through an intelligent program, and when the inlet temperature is lower than30When the temperature is low, the fan automatically shuts down without the need for manual shutdown.

16.Whole machine power:3.8KW/220V

17.Spray head cooling device (optional)

18.Device dimensions:1380mm(High)×770mm(Long)×620mm(Width)

Jutong spray dryer adopts bipolar cyclone separation and recovery system