Jinan Light Incubator Manufacturer

Device Model

PGX-1100B

Equipment capacity

1100L

1.Temperature control range:0-50Temperature control accuracy0.1Degree, fluctuation positive or negative0.5degree--positive and negative1Degree, unevenness, positive or negative1.5 Degree.

2.Moisture control range:/

3.Illuminance:022000LUX(0-164umol/m2.s),Infinite linearity0-100%Adjustable.

4.size(mm): Dimensions:1350*790*1918 Inner container size:1250*670*1280

5.Heating time:0Degree to50Degree less than30minute.

6.Cooling time:50Degree to0Degree less than40minute.

7.Number of layers of light source：2Side illuminationUsing customized light sources from Ningbo Prandtl.

8.Working hours: continuous cycle.

9.Work environment:0-30Temperature and humidity85%Below, there are no corrosive gases.

10.The compressor has a delay protection, with a protection time of3minute.

11.Working mode: Continuous operation (intermittent operation of compressor)

12.Noise: less than60decibel

13.Power requirements:220V/50HZ

14.Cooling method: Air cooling technology, environmentally friendly cooling.

15.The inner liner material is304Mirror stainless steel, appearance cold-rolled plate spray painted.

16.The design of polyurethane foam door has the characteristics of good insulation effect, small temperature fluctuation, and energy saving.

17.The LCD display is programmable, and the screen allows for intuitive viewing of time, set temperature, and real-time temperature.Cycle, etc.

18.Wind path structure: using a box bodytopministryinhaleThe wind,Back outWind path circulation, wind speed2m/s.To maintain uniform temperature inside the box.

19.Refrigeration system: importedSECOP(formerly known as Danfoss) Compressor, imported from GermanyEBMFan, environmentally friendly fluorine free and environmentally friendly refrigerant. Ensure that the product is a green and energy-saving product.

20.Safety function: Independent temperature limit alarm system, automatically interrupts when the temperature limit is exceeded, ensuring safe operation of the experiment without accidents. And there are high and low temperature alarms.Sensor malfunction alarm, etc.

21.Data processing: The computer can record the changes in various parameters internally, which is suitable for quality certification data recording and fault diagnosis.

22.Temperature regulation: The temperature sensor is a dual sensor (one main and one auxiliary) to ensure the normal operation of the equipment, and the heating isPIDFuzzy calculation method.

23.Light source characteristics:LEDThe light source board is waterproof and corrosion-resistant, made of aluminum substrate, with good heat dissipation effect, easy to draw and move up and down, imported chip, and service life50000H,The light source isLEDWarm colored light on the patch, evenly distributed and overlapped.

24.Shelf:4layer

25.Seedling tray: Each layer must be placed down4One, with a size of300*600mmor400*600mm.