The upgraded BR80 floor mounted jaw crusher is an instrument suitable for laboratory solid sample preparation. It is suitable for rapid and gentle coarse crushing and pre crushing of materials with medium hardness, hardness, brittleness, and toughness, such as processing hard ores, rock cores, rocks, alloys, slag, soil, ceramics, and similar samples. This machine can adjust the jaw plate crushing gap through zero point correction to achieve crushing effect.
Product Introduction
Upgraded VersionlandJaw crusherIt is an instrument suitable for laboratory solid sample preparation.
The difference between it and ordinary crushers lies in the addition of an automatic feeding system, which reduces the number of manual feeding times. It is suitable for fast and gentle coarse crushing and pre crushing of materials with medium hardness, hardness, brittleness, and toughness, such as processing hard ores, rock cores, rocks, alloys, slag, soil, ceramics, and similar samples. This machine can adjust the jaw plate crushing gap through zero point correction to achieve crushing effect.
working principle
Upgraded VersionlandJaw crusherThe crushed sample enters the grinding chamber through an anti splash funnel. The crushing process takes place in the space between the two jaw plates. One jaw wall is fixed, while the other jaw wall is driven by an eccentric axle. The crushed sample is crushed by the elliptical motion of the jaw wall and falls under the action of gravity. When the particle size of the sample is smaller than the distance between the openings at the lower end of the jaw plate, it falls into a pull-out receiving groove. The width of the jaw plate gap is continuously adjustable and equipped with a digital display to ensure that you can achieve a crushing effect corresponding to the gap width.
Main technical parameters of floor mounted jaw grinder
| Crushing principle | pressure |
| Injection size | <90mm |
| Grinding kit material | Manganese steel, stainless steel, tungsten carbide, zirconia, heavy metal resistant steel |
| Jaw width | 95x320mm |
| Adjustment of grinding gap width | 0-30mm |
| Receiving tank capacity | 5L |
| power supply | 380V，50/60HZ |
| drive power | 2.2kw |
main advantages
1. Large sample processing capacity and high degree of fragmentation
2. Discharge size (d90<2mm)
3. The gap width between the jaw plates is continuously adjustable
4. Zero point correction to compensate for wear and tear
5. The motor has anti overload performance and safety protection switch
6. Fog pollution grinding of various materials
7. Anti splash feeding funnel and jaw plate can be quickly fixed without tools
8. Easy to clean crushing chamber
9. Continuous grinding with dust removal interface
10. Add an automatic feeding system to reduce the number of manual feeding times
Application field
Ceramics and Glass:Glass and ceramic oxides
building material:Basalt, bricks, cement slag, refractory clay
Environmental research:Electronic components, soil, construction waste
Mineralogy and Metallurgy:Metallurgy, coal, coke, feldspar, quartz, granite, ore, rock, silicon, slag
