Japanese ypnp new infrared spectrometer Tera Prospector

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Tera Prospector $r $nTera Prospector is a new type of infrared spectrometer from Japan, which uses terahertz (THz) electromagnetic waves (the frequency of the boundary between light waves and radio waves) for time series conversion of pulse spectra.

Product Details

Japanese ypnp new infrared spectrometer Tera Prospector

Tera Prospector is a new type of infrared spectrometer that uses terahertz (THz) electromagnetic waves (the frequency of the boundary between light waves and radio waves) for time series conversion of pulse spectra.
By measuring the time waveform of the electric field strength of electromagnetic wave pulses, phase information is measured simultaneously with the electric field strength. By analyzing the time waveform differences between the reference and sample, the frequency dependence of the complex dielectric constant (complex refractive index) of the sample can be obtained.
The control system and optical system are condensed into a compact body at a low cost.

Main Features

This system configuration allows for external laser input, which has advantages in terms of operation and cost.
Utilize spacious sample room space to support various measurements (transmission/reflection/mapping, etc.).
Equipped with software that supports a range of measurement program restructuring and measurement automation.
The connection with the measuring PC is simplified and the installation is also easy.

Japanese ypnp new infrared spectrometer Tera Prospector

Performance/Specifications

measurement method	THz TDS (Time Domain Spectroscopy)
Measurement signal	Electric field intensity time waveform
output data	Transmission/reflection spectroscopy (optional), complex refractive index, complex dielectric constant (using analysis program)
Optical layout of sample room	Configuration of transmission optical system The accompanying optical system (optional) can be used for general measurements such as reflection measurement and ATR measurement. A low-temperature thermostat can also be used for variable temperature measurement.
Sample room volume	232 (width) x 482 (depth) x 281 (height) millimeters, approximately 31L
Measurement strip	200 GHz to 4 THz or higher (cut-off frequency)
Frequency decomposition	6 GHz or lower
dynamic range	Above 40 dB (power spectrum: maximum value)
signal-to-noise ratio	2500:1 or more (time waveform)
Femtosecond pulse laser	Optional (can be externally introduced) The central wavelength is about 780 to 810 nm, the pulse width is 120 fs or less, the intensity is 0.5 nJ/pulse or greater, and the repetition rate is 40 MHz
Sample table	Solid, liquid (using liquid pool)
control the computer	At least one wired LAN and one USB port are required to connect to Tera Prospector, a computer that meets the operating requirements of the Windows operating system (version 10 or higher).
software	Measurement software, analysis software
External dimensions/weight	720 (W) × 660 (D) × 438 (H) mm, approximately 65 kg (* excluding wiring, protrusions, etc.)

operating environment

power supply	AC100V(50/60Hz)10A
temperature	25 ℃± 2 ℃ (recommended 25 ℃± 1 ℃)
humidity	Below 60% RH (recommended below 30% RH)
Dry air	The flow rate of dry air is 10-20NL/min (dew point -60 ℃), But users should adjust the flow according to the degree of humidity impact they want to reduce. Dry air generators are available for selection.
other	The cleanliness of the general office level usage environment is not a problem, but as it is a precision equipment, it requires an environment with less dust. Regarding vibration, as long as it is at the level of a regular office, there is no problem (to the extent that the body cannot feel it).

option

Automatic sample transmission platform	This is the sample stage for transmission measurement. By integrating it into the TeraProspect device, it is possible to automatically measure the spectrophotometry of multiple samples.
Automatic transfer of reflective samples platform	This is the sample stage for reflection measurement. By integrating it into the TeraProspect device, it is possible to automatically measure the spectrophotometry of multiple samples.
Laser beam automatic alignment (factory option)	The laser path can be adjusted to maximize the peak intensity of the terahertz time waveform. In addition, the mirror that adjusts the laser beam path can be remotely controlled through a signal measurement program.
Liquid pool, gas pool Low temperature thermostat (Factory Options)	This is a device option that enables transmission spectroscopy of liquid samples, gas transmission measurement, and transmission measurement in the low-temperature range.
Dry air generator	It can generate dry air supply to the TeraProspect device.