Japanese scanning module rack SW1002

Japanese scanning module rack SW1002

The combination of the scanning module rack SW1002 and the tester allows for multi-channel measurement, with a maximum of 264ch

Suitable for battery measurement, ensuring combination accuracy

Can switch between voltage meter and battery tester and measure

Maximum 264ch (2-wire) to 72ch (4-terminal)

Considering the circuit design for impedance measurement, reducing measurement errors (with an impact of 0.01% f.s ※ 1), ※ 1 BT4560 with a range of 100m Ω, R measurement, and measurement frequency of 1kHz

Suitable for OCV measurement, internal resistance measurement, and external potential measurement of battery cells

Can also measure battery modules (up to DC 60V)

Japanese scanning module rack SW1002

Basic Parameters

12 slots

Corresponding module: Multi channel scanning module SW9001 (2-wire/4-wire)

Multi channel scanning module SW9002 (4-terminal pair (instrument constructed with four terminal pairs such as BT4560)/2-wire type)

Up to 2 testers can be connected

1 unit of 2-wire type+1 unit of 4-wire type, or 1 unit of 2-wire type+1 unit of 4-terminal type

The maximum input voltage is DC 60V (cannot be connected to battery packs exceeding DC 60V), AC 30 Vrms, 42.4 Vpeak, Maximum rated voltage to ground: DC 60 V

Communication interface LAN, USB, RS-232C (for host, for tester)

Functional channel switching, wiring method, scanning function, communication command transmission, channel delay, shielding switching

Power supply AC 100 V~AC 240 V/30 VA (50/60 Hz)

Volume and weight: 430W × 132H × 420D mm, 6.0 kg

AttachmentPower cord x 1, user manual x 1, precautions for use x 1, USB driver CD x 1