Japanese four wire testing line 9001-D50F-4W-11

Japanese four wire testing line 9001-D50F-4W-11A four wire testing line for SW9001, with a length of 1 meter+2 meters extension line, a total length of 3 meters, equipped with Dsub 50 pin female connector, 4 wires per strand, a total of 11 strands, defined according to SW9001 pins.

Japanese four wire testing line 9001-D50F-4W-11

SW9001 Connector Signal Table (2-Wire Type)

It is the needle configuration when using 2-wire measuring instruments (DM7275, DM7276, etc.).

The frame of the module measurement connector is connected to the housing (metal part) of this instrument, and also connected (conductive) to the protective grounding terminal of the power input port.

SW9001It is a multi-channel scanning module that can be installed on the SW1001 or SW1002 scanning module rack for use.

It belongs to a 2-wire 22 channel or 4-wire 11 channel multi-channel scanner.

The electromagnetic induction (eddy current) in AC impedance measurement can be reduced by reducing the magnetic beam leakage generated by the measurement current and separating the Source and SENSE, thereby reducing the impact on the measurement value.

It can be connected to the measuring instruments of System 2 by switching the analog bus.

Basic ParametersMulti channel scanning moduleSW9001

Wiring method: 2-wire or 4-wire

Number of channels 22ch (2-wire type)/11ch (4-wire type)

Contact type armature relay

Channel switching time 11ms (excluding measurement time)

Maximum allowable voltage DC 60 V, AC 30 Vrms, 42.4 Vpeak

Maximum allowable current DC 1 A, AC 1 Arms

Maximum allowable power 30 W (resistive load)

Maximum rated voltage to ground DC 60V

Volume and weight 25.5W × 110H × 257D mm, 210 g

AttachmentUser manual x 1