Product Categories

Shanghai Qiantuo Trading Co., Ltd

E-mail
Phone
Address
713, No. 6, Lane 99, Jiayong Road, Jiading District, Shanghai

Contact Now

Japanese SMC Standard Cylinder Sample Book

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Before opening and installing the SMC cylinder, it is necessary to check whether the components have been damaged during transportation, whether the connecting bolts are loose, and whether the electromagnetic head of the valve components has been damaged. After removing the protective cap and protective oil, the SMC cylinder should be installed and used according to the requirements of the user manual. $r$n2、 Clean and dry compressed air should be used as the working medium, and the piping should be thoroughly blown to prevent impurities from entering the system and causing the cylinder and valve to malfunction. If lubrication is required, a mist generator should be added to the piping system. It is recommended to use lubricating oil ISOVG32.

Product Details

Japanese SMC Standard Cylinder Sample Book

CDG1BN32-550Z1

CG1-Z1 series cylinder/standard type: single rod double acting

● Add single acting type/direct installation type/end lock type [New]

● Increased freedom of piping

Piping can be installed at intervals of 90 degrees (4 directions) (customized specification: XC3)

The joint bearings in the rod end connectors have been standardized

● Can be installed interchangeably with existing products

● Rich installation options available

● Add models with pole end connectors and swinging bases

No need to order cylinders and installation parts separately anymore

Field Descriptionfield valueValue Description

Built in magnetic ringDBuilt in magnetic ring

Installation typeBBasic type (without threaded holes for ear shaft installation)

formNrubber buffer

bore32Cylinder diameter 32mm

Types of threaded connections-Rubber buffer: Rc (Φ 20- Φ 100); Air buffer: M5 × 0.8 (Φ 20, Φ 25), Rc (Φ 32- Φ 100)

cylinder stroke550550

Front end thread of rod-Rod end external thread

Cylinder tracking number (with protective cover)-Without protective cover

Swing base-Nothing

Rod end installation components-Nothing

Magnetic switch model-Non-magnetic switch

Number of magnetic switches-2 or none

Customized specifications-standard

Pipe diameter1/8

Applicable fluidsair

formPneumatic type

mode of actiondouble-acting

Rod end external thread sizeM10X1.25

Low operating pressure [MPa]0.05 MPa

High usage pressure [MPa]1.0 MPa

Ensure pressure resistance [MPa]1.5 MPa

Use fluid temperature small value [° C]-10 ℃

Using high fluid temperature [° C]60 ℃

Low ambient temperature [° C]-10 ℃

Maximum ambient temperature [° C]60 ℃

Give oilNo oil type

1. Standardization of internal threads at the rod end

2. Magnetic switch improves operability and is easy to adjust position

3. Add screw hole type for ear less shaft installation in the basic model

4. Established models for pole end mounting components and swing base mounting components (saving time for ordering cylinders and mounting components separately)

5. Equipped with magnetic switch (CDG1-Z series: CDG1, CDG1W, CDG1K, CDG1KW, CDG1R, CDG1KR, CDBG1)

Cylinder installation method

Before using SMC cylinders, it is necessary to check whether the cylinders have been damaged due to collisions during transportation, whether the connecting components are tight, and if there are no abnormalities before installation and use. During the installation process, the activity of the cylinder

The plunger cannot withstand eccentric loads but lateral loads, and the load direction should be aligned with the axis of the piston rod. Regardless of the installation method, it is essential to ensure that the cylinder block does not deform, and SMC

The installation base of the cylinder should have stable rigidity, and it is not allowed to use electric welding to connect the load and piston rod.

Order Number

1590339

CDG1KBN32-75Z

1590340

CDG1KBN32-100Z

1590341

CDG1KBN32-100FZ

1590342

CDG1KBN32-80Z

1590343

CDG1KBN32-90Z