Japan Sanfeng roundness tester cylindrical measuring instrument RA-1600

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The compact and wide measurement range of the Japanese Sanfeng roundness measuring instrument RA-1600 cylindrical measuring instrument ensures that its accuracy can be comparable to higher-level models. Maximum measured diameter:; 280mm vertical movement distance: 300mm maximum worktable load: 25kg radial rotation accuracy: (0.02+6H/10000) μ m axial rotation accuracy: (0.02+6X/10000) μ m

Product Details

Japan Sanfeng roundness tester cylindrical measuring instrument RA-1600

1. The compact size and wide measurement range ensure that its accuracy is comparable to higher-level models. Maximum measured diameter: ø 280mm Vertical movement distance: 300mm Maximum worktable load: 25kg Radial rotation accuracy: (0.02+6H/10000) μ m Axial rotation accuracy: (0.02+6X/10000) μ m
2. The D.A.T. (digital adjustment table) function helps with manual workpiece centering and leveling.
3. The detection section provides safety devices as standard features. The detector is equipped with collision sensing function (in the vertical direction) to prevent destructive collisions on the Z-axis. In addition, it is equipped with an over limit prevention function, which will stop the system when the displacement of the detector exceeds its range.
4. A sliding mechanism can be installed inside the detector bracket (optional sliding detector bracket). It is difficult to achieve standard detectors that can measure deep hole thick walled workpieces with a single click.
5. If roundness/cylindricity analysis software (ROUNDPAK) is used, the measurement results can be displayed graphically.

Japan Sanfeng roundness tester cylindrical measuring instrument RA-1600Performance Introduction:

Small size and wide measurement range ensure its accuracyComparable to higher-level models.Maximum measured diameter: ø 280mmVertical movement distance: 300mmMaximum worktable load: 25kgRadial rotation accuracy: (0.02+6H/10000) μ mAxial rotation accuracy: (0.02+6X/10000) μ m

The D.A.T. (digital adjustment table) function helps with manual workpiece adjustmentHeart and tone level.

The detection section provides safety devices as standard features. inspectThe output device is equipped with collision sensing function (in the vertical direction)Prevent destructive collisions on the Z-axis. In addition, there are alsoEquipped with overload prevention function,When the displacement of the detector exceeds its limitWhen the range is reached, the system will be stoppedThe operation.

Can be installed inside the detector bracketSliding mechanism (optional sliding inspection)Dispenser bracket). Capable of measuring deep hole thickness with a single clickIt is difficult to implement standard detectors.

If roundness/cylindricity is usedAnalysis software (ROUNDPAK),Can display measurements graphicallyQuantitative results.

Product Specifications：

model			RA-1600
Rotating worktable	Rotation accuracy (JIS B 7451-1997)	radial	(0.02+6H/10000) µ m H: for measuring height (mm)
		axial	(0.02+6X/10000) µ m X: Distance to the axis of the rotating worktable (mm)
	rotation speed		4, 6, 10rpm
	Effective diameter of workbench		ø150mm
	Range of heart/level adjustment		D.A.T.
	Heart regulating range		±3mm
	Adjust the level range		±1º
	Maximum load-bearing capacity of countertop		25kg
	Maximum measured diameter		ø280mm
	Maximum workpiece diameter		ø560mm
Vertical axis movement	Drive straightness (λ c2.5)		Narrow range: 0.20 µ m/100mm, wide range: 0.30/300mm
	Parallelism with the turntable axis (reference to the busbar element)		1.5µm/300mm
	positioning speed		Maximum: 15mm/s (measured at 0.5, 1.0, 2.0, 5.0 mm/s)
	Vertical travel		300mm
	Maximum detection height		300mm*1
	Maximum detection depth (when using a standard measuring rod)		ø 32 × 91mm (depth), ø 7 × 50mm (depth)
X-axis	Straightness (λ c2.5)		2.7µm/140mm
	Verticality to the turntable axis (reference to the busbar element)		1.6 µm/140mm
	range of movement		165mm (-25mm -+140mm turntable center)
	movement speed		Maximum: 8mm/s (measured at 0.5, 1.0, 2.0, 5.0 mm/s)
detector	force measurement		10 - 50mN, Levels 1-5
	Standard measuring rod, material		ø 1.6mm hard alloy
	scope	standard	±400µm/±40µm/±4µm
		track	±5mm
	other		Simple touch switch for measuring inner/outer diameter, Z-axis collision detection function, and angle scale mark on the measuring head (± 45 º)
other	power supply		100-240VAC
	power consumption		80W (excluding PC and printer)
	atmospheric pressure		0.39MPa
	air consumption		22L/min standard state (gas source above 80L/min)
	host weight		170kg

*1: If the measurement height of the workpiece is less than 20mm, an auxiliary workbench option is required.