JF-1 intergranular corrosion tester

1. The equipment meets the requirements of the B, C, and E test methods in the national standard GB/T4334-2008 for instruments, equipment, and test time control.

2. The equipment is equipped with four independent corrosion testing and control devices. Including large-diameter ground mouth triangular flasks, spherical or serpentine condenser tubes, electric heating power display and control, temperature display, test time control, and security devices.

3. The equipment comes with a cooling water tank and a cooling water circulation system. The equipment has an exhaust gas discharge device and can be connected to the existing exhaust system in the laboratory.

4. The equipment has a single set of device failure (temperature out of control) alarm and handling (stopping operation). Emergency response (stop operation) function for loss of control or water in condensate circulation.

5. The device can be equipped with a remote monitoring system. In the network environment, mobile phones can be used to remotely monitor the operation of devices. And it has emergency handling (stopping operation) function.

Considering the possibility of flask breakage and solution leakage accidents, the equipment is equipped with protective devices to prevent the leakage of solution from causing damage to the equipment.

Input power supply: 220V

Number of workstations: 4

Cone bottle capacity: 1000m

Cone bottle diameter: 40mm

Heating power: maximum 1200W per workstation

Heating power control range: 1-100%

Time control: 0.01 seconds to 999 minutes

The volume of the condensate circulating water tank is 0.17 cubic meters

Dimensions: 500x520x800 (height)

Water tank 500x800x1000 (height)