Italvibras vibration motor MVSI15/1710-S02

Italvibras vibration motor MVSI15/1710-S02

1、 Product Overview‌

• ‌Product SeriesThe MVSI series is used for vibration machinery and equipmentBenchmark product lineSuitable for multiple industrial fields.

• ‌Core Features‌：

• The maximum centrifugal force value can reach 30500 kgf (300 kN).

• Committed to improving performance through continuous technological innovation.

• The design aims to ensure high performance under various usage and environmental conditions.

‌2、 Main technical characteristics‌

1. ‌Electrical Characteristics‌：

• ‌power supplySupports three-phase voltage (24V to 690V, 50/60Hz) and single-phase voltage (100-130V/60Hz and 200-240V/50Hz).

• ‌insulation classThe standard is F level (155 ° C), and H level (180 ° C) can be provided as required.

• ‌working systemCan operate at maximum nominal centrifugal force and electrical powerContinuous operation (S1)According to the model and operating conditions, it can also operate intermittently.

• ‌thermal protectionStarting from machine base 70, a 130 ° C PTC thermistor is standard, and smaller sizes can be provided as needed.

2. ‌Mechanical and Environmental Characteristics‌：

• ‌Protection levelThe standard is IP66 (according to IEC/EN 60529), and optional IP69K (according to ISO 20653, DIN 40050-9).

• ‌impact resistance ratingIK 08 (according to IEC/EN 62262).

• ‌ambient temperatureThe standard operating temperature is -20 ° C to+40 ° C, and higher or lower temperature versions can be provided upon request.

• ‌moisture-proof treatmentAll vibration motors come standard with vacuum impregnation to AF 33 and AF 35 levels, and larger sizes are treated with a "drip" style.

• ‌lubricateFactory lubricated, no additional lubrication is required during startup.

• ‌Shell and coatingMachine base of 70 and below is made of high-strength aluminum alloy, while larger sizes are made of ductile iron. The surface is treated with electrostatic spraying based on epoxy polyester powder (baked at 200 ° C) and subjected to a salt spray test for 500 hours.

3. ‌Centrifugal force and regulationThe centrifugal force has a wide rangeThe centrifugal force can be adjusted by adjusting the position of the eccentric block.

‌3、 Product model and specifications‌

The manual provides a detailed list of various models and specifications under different pole numbers (speeds), mainly including:

• ‌2-pole (approximately 3000/3600 rpm)‌

• ‌4-pole (approximately 1500/1800 rpm)‌

• ‌6-pole (approximately 1000/1200 rpm)‌

• ‌8-pole (approximately 750/900 rpm)‌

For each model, the table provides the following key parameters:

• ‌Model code, size, temperature rating‌

• ‌Static torque, centrifugal force (kgf/kN), weight (kg)‌

• ‌Maximum input power (W), maximum current (A)‌

• ‌Starting current to maximum current ratio (Ia/In)‌

‌4、 Compliance and Certification‌

The product complies with multiple international and regional standards and directives, including:

• ‌EU DirectiveATEX 2014/34/EU, ATEX 2014/35/EU and ATEX 2011/65/EU.

• ‌International StandardIEC/EN 60079 series (explosion-proof) CAN/CSA C22.2 No. 100-95、UL 1004-1。

• ‌National/Regional StandardsUK regulations, Chinese GB/T 3836.1-2021 and GB/T 3836.31-2021, Eurasian Economic Union TR CU, Korean KOSHA certification, etc.