Intrinsic safety ultrasonic level gauge ECHOTOUCH series US03

NegotiableUpdate on 05/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

● Provides a measurement range of 3m ● Reliable reflection and condensation technology measures ● 2 (5cm) beamwidth applied in limited space ● Easy configuration with WebCal software and USB adapter ● PVDF transducer and PP housing for corrosive environments ● Fault safety diagnosis and optional fault safety signal output ● 6P type (IP68) compact housing suitable for small tanks ● Automatic temperature compensation -40 º C... 80 º C.

Product Details

Product Introduction

FLOOLINE ECHOTOUCH ® The US03 intrinsically safe reflective ultrasonic level gauge achieves continuous level measurement with a maximum range of 9.8 '(3m) through continuous 4-20 mA analog signals, and is set up using the WebCal software. This type of sensor is suitable for medium tanks containing no foam or highly volatile media such as chemicals, water, waste water and oil. Typical application scenarios include miniature collection tanks, daily supply tanks, and wastewater tanks.

Technical Parameter

Range: 10.1cm... 3m

Accuracy: around ± 0.2%

Resolution: 1mm

Dead zone: 10.1cm

Wave speed width: 2 "(5cm)

Supply voltage: 14-28 VDC

Loop resistance: 500 Ω @ 24VDC

Signal output: 4-20mA, two-wire

Process temperature: -40 º C... 80 º C

Environmental temperature: -35 º C... 60 º C

Pressure: 2 bar

Shell rating: IP68

Shell material: PP

Sensor type: Reflective

Sensor pad: PVDF (polyvinylidene fluoride)

Cable:

Cable length: 48 "(1.2m)

Installation interface: 2 "NPT or 2" G

Installation gasket: N/a or Viton ®

Level: Intrinsic Safety

Explosion proof standard: Class I, Zone 1, Groups A, B, C, and D; Second level E, F, and G groups; Level 3; Level 1 Zone 0 IIC Group, Zone 20 IIC Group

Explosion proof certification: II 1G, EEx ia IIC Gc

Certification: CE