- Phone
-
Address
Building 4, Chengde High tech Intelligent Garden, Liandong U Valley, Dongxiying Area, High tech Zone, Chengde City
Chengde Shenghe Intelligent Instrument Co., Ltd
Building 4, Chengde High tech Intelligent Garden, Liandong U Valley, Dongxiying Area, High tech Zone, Chengde City
The SHF series metal tube float flowmeter is mainly used for real-time monitoring of instantaneous and cumulative flow rates of liquids and gases, withstanding high temperatures, high pressures, and corrosive media. It outputs accurate signals through magnetic coupling non-contact sensing and supports flow over limit alarm and remote data transmission functions.
technical parameters
Instrument model:SHF
Installation form: Vertical installation, from bottom to top
Vertical installation, from top to bottom
Horizontal installation, from left to right or from right to left
Bottom side installation, bottom in side out
Side installation, side in and side out
indicator On site instantaneous flow indication
On site instantaneous flow indication with upper and lower limit alarms
Remote transmission indicatorOn site instantaneous, cumulative flow indication, 24V DC power supply, two-wire 4-20mA output, with HART @ communication protocol, intrinsic safety explosion-proof
Remote transmission indicatorOn site instantaneous, cumulative flow indication, 24V DC power supply, two-wire 4-20mA output, with HART @ communication protocol, explosion-proof type
3.6V lithium battery power supply, on-site LCD instantaneous and cumulative flow display, no signal output
measurement range : Lower range 1~10L/h 水, 0~0.7m3/h Air at ATP
Upper range 20~200m3/h 水, 400~4000m3/h Air at ATP
medium temperature On site type -40 ℃~+300 ℃ remote transmission type -20 ℃~+80 ℃
ambient temperature On site type -Remote transmission type from 40 ℃ to 120 ℃ -20 ℃ to 70 ℃
Accuracy: On site type ± 1.5% remote transmission type ± 1.0%
Range ratio: 10:1
Protection Level IP65 IP67
Explosion proof mark: Exia II CT6 security explosive type; Exd Ⅱ CT6 Gb Explosion proof Type
Cable interface Intrinsic safety type:M20 × 1.5 Explosion proof Type: 1/2 "NPT
Nominal pressure: DN15-DN50 4.0Mpa DN80-DN200 1.6Mpa
Jacket form : Insulation jacket, cooling jacket
connection type : Flange connection standardHG/T20592-2009
attachmentMagnetic filter straight pipe section
supplyInternal thread connection of hydrogen measuring rotor flowmeterHydrogen rotary flowmeter, internal thread hydrogen flowmeter, stainless steel hydrogen float flowmeter, small-diameter hydrogen metering instrument, leak proof hydrogen flowmeter, precision gas rotary flowmeter, hydrogen energy dedicated flow monitoring instrument