Intelligent mattress heart rate and breathing simulator

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The working principle of the intelligent mattress heart rate and breathing simulator: This simulator generates low-frequency vibration and expansion signals in a silicone mold, simulating human heart rate and breathing signals.

Product Details

Intelligent mattress heart rate and breathing simulator

Key Features:Heart rate and breathing simulator, also known as intelligent mattress tester, intelligent pillow simulator, sleep simulation tester.

Applicable to:Suitable for intelligent sleep mattresses, pillows, and other sensing solutions such as ceramic piezoelectric sensing, millimeter wave radar, and gyroscopesCan be used for pillows, sleep respiratory monitors, sleep recorders, physical sign monitors, wearable heart rate monitors, etcHeart rate and respirationSimulation testing.

Applicable locations:Smart mattresses, smart pillows, sleep breathing related enterprises, medical device testing and registration institutions, medical metrology calibration units, and high-endSchool research, teaching, and training.

Intelligent mattress heart rate and breathing simulator

Technical Specifications

parameter name		Heart rate respiratory simulator（LFT-B/A）Technical specifications
		measurement range	step size	margin of error	widthDegree level
heart rate		40-240 times/min	1 time/min	±1 time/min	0～Level 5
breathe		5-100 times/min	1 time/min	±1 time/min	0～Level 5
Mode Settings	singleHeart rate mode	Only activate heart rate mode
	singlebreathing pattern	Only activate breathing mode
	heart rate+Breathingmixpattern	Heart rate and respiration are activated simultaneously
output signal		Low frequency vibration and expansion signals,simulationHuman heart rate and respiratory signals
LFT-B		Equipped with an independent silicone mold, the internal filling material isSilicone
LFT-A		The mold and the host are integrated, and the contact surface is made of rubber

IIIConfiguration List

serial number	Material Name	quantity	explanation
1	host	1 unit	Nothing
2	Silicone mold body	1 unit	Nothing
3	connecting wire	1 item	Nothing
4	3-core power cord	1 item	Nothing
5	Instruction Manual	1 point	electronic version
6	Measurement Calibration Certificate	1 copy	printed version
7	Certificate of Conformity&Warranty Card	1 copy	printed version

Operation steps introduction:

1Connect the host controller and silicone mold through the manufacturer's standard data cable;

2Connect the host controller to the AC power supply and turn it on;

3Place the silicone mold on the tested instrument, paying attention to aligning the center of the silicone mold with the sensor position;

4Click the start button on the main interface to see the waveform moving, indicating signal output, and observe the numerical reading on the tested instrument;

5Adjust the range and amplitude of heart rate or respiratory rate values, and directly touch and click on the corresponding area of the interface to make relevant settings;

6If only measuring single heart rate mode, set the breathing amplitude to 0If only one breath is measured, set the ECG amplitude to 0.