Intelligent manipulator with forward and reverse control continuous output type

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The continuous output type of intelligent manipulator with forward and backward control is divided into Q-type manipulator and D-type manipulator. The Q-type operator operates in analog continuous output mode and can also set positive and negative effects; The D-type manipulator has forward and reverse switch output modes, which can be manually positioned or directly controlled for forward and reverse rotation. Suitable for manual positioning control of various actuators. One input signal used for measuring process signals or measuring valve opening position. Can be equipped with DC current, DC voltage, thermistor, thermocouple, etc. Dual display windows display measurement/feedback signals and operational output values respectively. Welcome to consult with all users.

Product Details

Intelligent manipulator with forward and reverse control continuous output typeDivided into Q-type manipulator and D-type manipulator. The Q-type operator operates in analog continuous output mode and can also set positive and negative effects; The D-type manipulator has forward and reverse switch output modes, which can be manually positioned or directly controlled for forward and reverse rotation. Suitable for manual positioning control of various actuators. One input signal used for measuring process signals or measuring valve opening position. Can be equipped with DC current, DC voltage, thermistor, thermocouple, etc. Dual display windows display measurement/feedback signals and operational output values respectively. Welcome to consult with all users.

Dimensions
1. 160 × 80 × 125mm horizontal opening size: 152 × 76
2. 80 × 160 × 125mm vertical opening size: 152 × 76
3. 96 × 96 × 112mm hole size: 92 × 92
4. 96 × 48 × 82mm horizontal opening size: 92 × 45
5. 48 × 96 × 82mm vertical opening size: 92 × 45

Intelligent manipulator with forward and reverse control continuous output typeproductIntroduction
Operators are divided into Q-type operators and D-type operators. The Q-type operator operates in analog continuous output mode and can also set positive and negative effects; The D-type manipulator has forward and reverse switch output modes, which can be manually positioned or directly controlled for forward and reverse rotation. Suitable for manual positioning control of various actuators.
One input signal used for measuring process signals or measuring valve opening position. Can be equipped with DC current, DC voltage, thermistor, thermocouple, etc. Dual display windows display measurement/feedback signals and operational output values respectively.
Signal output can be directly operated through button operation. The operation output has upper and lower limit limiting functions.
Optional external power supply.
Optional alarm output function
Optional measurement feedback transmission output function.
Optional communication interface for reading data.

Basic specifications

project		specification
power supply voltage	ACpower supply	100~240 V AC 50/60 Hz
	AC/DCpower supply	10~24V AC 50/60 Hz；10~24V DC
power consumption	ACpower supply	7 VAbelow
	AC/DCpower supply	AC：6 VAfollowing;DC：5Wbelow
Allowable voltage variation range		The voltage of the power supply90%~110%
insulation resistance		≥100MΩ（500V DC MEGABenchmark)
insulation strength		2000V AC (Test conditions:50/60Hz，1Minutes)
anti-interference		IEC61000-4-2(Electrostatic discharge))Grade III IEC61000-4-4(Electric Fast Transient Pulse Group), Level III IEC61000-4-5(Surge), Level III
Protection level		IP65(Product front panel protection)（GB/T42-2008）
runtime environment	ambient temperature	-30~60℃(Save:-40~65℃）
	ambient humidity	35~85 %R•HNo condensation
	Installation location	Indoor, height<2000m

■ Enter specifications

project	specification
Measure and control speed	0.1second
basic error	±0.2 %F•S
display range	-1999~9999
Display specifications	double4bitLEDDisplay (Main Display Window)+Second display window)

Æ Note:Please refer to the input signal type description for details Input signal and display explain.

■SVOperation output specifications

project	specification
D1	relay output(Single normally open)（250V AC/3A）	DType operator
D2	OCGate output (voltage should be less than)24V DCThe current should be less than20mA）	DType operator
Q1	current output(4~20)mAThe(0~10)mAThe(0~20)mA	QType operator Photoelectric isolation, Resolution:1/10000Load capacity:600Ω
Q2	voltage output(0~5)VThe(1~5)V
Q3	Voltage output（0-10）V

■ Optional specifications

project			specification
alarm output	160×80size	T1~T2	1~2The output of the alarm relay is normally open+Normally closed dual contacts		250V AC/3A resistive load
	96×96size	T1~T2	1~2Point alarm relay output, all with normally open contacts
	96×48size	T1~T2	1~2Point alarm relay output, all with normally open contacts
PVtransmitter output	A1		current output(4~20)mAThe(0~10)mAThe(0~20)mA	Photoelectric isolation, Resolution:1/10000Load capacity:600Ω
	A2		voltage output(0~5)VThe(1~5)V
	A3		Voltage output（0-10）V
communication interface	MS1		RS232interface	Photoelectric isolation, Response time: less than500μS(Measurement value) Communication protocol selected through software （TCASCIIorModbus-RTU）
	MS2		RS485interface
External supply power supply	B1		24V±5% 50mAbelow
	B2		12V±5% 50mAbelow