Integrated micro water quality monitoring station

NegotiableUpdate on 01/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

After applying it to water quality testing, the integrated micro water quality monitoring station can achieve real-time online monitoring of important indicators such as pH value, turbidity, COD (chemical oxygen demand), water temperature, etc. in domestic and production water at monitoring points 24 hours a day, and regularly upload and update water quality monitoring data.

Product Details

　　Integrated micro water quality monitoring stationProduct Introduction:

After applying it to water quality testing, the micro water quality monitoring station can achieve real-time online monitoring of important indicators such as pH value, turbidity, COD (chemical oxygen consumption), water temperature, etc. in domestic and production water at monitoring points 24 hours a day, and regularly upload and update water quality monitoring data.

Product Features:

Only one instrument is needed to complete all online monitoring tasks of the water quality automatic monitoring station.

2. One instrument can simultaneously measure large and multiple parameters of water quality, saving usage costs.

3. The flexible calibration of standard solutions ensures high accuracy.

4. Optical quantitative algorithm ensures high repeatability.

The flexible setting of reaction time ensures accurate monitoring of any water sample.

6. The infusion pump has a long service life and only needs to replace the syringe once every three years.

7. Two methods are used for external sampling: submersible pump and self-priming pump.

8. The online monitoring methods are diverse, allowing for manual measurement at any time, automatic timed measurement, automatic periodic measurement, and other measurement methods.

　　Integrated micro water quality monitoring stationNotes:

1. Please check if the packaging is intact and verify if the product model matches the selected one;

2. Do not connect live wires. Only after the wiring is checked and confirmed to be correct, can the power be turned on;

3. Do not arbitrarily modify the components or wires that have been welded before the product leaves the factory during use;

4. This device belongs to precision components. Users are advised not to disassemble it by themselves, use sharp objects or corrosive liquids to contact the sensor surface, in order to avoid damaging the product;

5. Please keep the calibration certificate and certificate of conformity, and return them together with the product during maintenance.

Additional services

Product maintenance and calibration

Installation and testing of products, verification of products, and provision of verification documents

Technical support for products, sales of consumables

Product inspection agency (metrology institute) and product certification (CPA/CEP)