Input type refrigerator

iMCooler204/402/805Input type refrigeratorIntroduction:

The iMCooler series uses a compressor for cooling and exchanges heat directly with the liquid medium through an evaporator, reducing the temperature of the liquid medium. Simultaneously using a temperature controller for temperature control, with constant temperature and cooling functions.Input type refrigeratorIt is an ideal choice for continuous cooling, which can quickly cool liquids to low or ultra-low temperatures, and can replace dry ice for ultra-low temperature experiments. Due to the fact that all cooling power is concentrated on the cooling head, the cooling efficiency is high, the occupied volume is small, and the cooling speed is fast. When used in conjunction with a heating cycle, it can lower the system temperature to below room temperature for operation.

It can quickly lower the liquid to low or ultra-low temperature, and can replace ice salt, dry ice, and liquid nitrogen for long-term low-temperature reactions. Due to the concentration of all cooling capacity on the cold head, the cooling efficiency is high, the occupied volume is small, and the cooling speed is fast. The laboto input cooler can control temperature within its working range. There are various forms of cold heads, including rigid coils, rigid cold fingers, flexible cold fingers, and flexible corrugated pipes. Products cooled by two-stage cascade compressors can easily reach -80 ℃.

1. Product features:

Multiple compressors are stacked and combined with proportional refrigeration control technology. At the control point, the refrigeration output is proportional, and the compressor does not need to output 100%, which is more energy-efficient.

There are various forms of cold heads, including rigid coils, rigid cold fingers, flexible corrugated pipes, etc. Rigid coils are suitable for heating type bath constant temperature circulators to control the temperature below room temperature, rigid cold fingers are suitable for solvent recovery in cold traps, flexible corrugated tubes are suitable for Dewar flasks, and glass flasks can be directly placed in low-temperature freezing liquids for reaction.

External Control Signal (ECS) input, which can be used for external smart devices to control the start and stop of instruments.

When an alarm is triggered, both the light and sound will alert.

The buzzer can be set to silent or audible.

Multiple operating modes are available for selection.

Mode 1: When the power supply of the device is disconnected during operation, the next time the device is powered on, it will be in a normal stop state, and the set value can be changed.

Mode 2: When the power is disconnected during device operation, the device will automatically run the next time it is powered on, and the set value can be changed.

Mode 3: When the power is disconnected during device operation, the device will automatically run the next time it is powered on, and the set value cannot be changed.

The device serial number can be checked through software

2. Product application

Replace ice salt, dry ice, and liquid nitrogen for long-term low-temperature reactions.

● Cooperate with cold trap applications for container recovery.

● Cooperate with the application of a heated bath constant temperature circulation device to control the temperature below room temperature.

● Freeze drying.

3. Main technical parameters of the product