-
E-mail
knewlink@knewlink.cn
- Phone
-
Address
4th Floor, Building 2, Nengli Science and Technology Innovation Park, No. 999 Jinzha Road, Fengxian District, Shanghai
Product Categories
Shanghai Newlink Communication Technology Co., Ltd
Industrial grade two-layer network management type 100Mbps 2 optical 24 motor rack mounted power switch
NegotiableUpdate on 07/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Supports 2 100Mbps optical and 24 10/100M adaptive electrical interfaces; Support front and rear indicator lights, fiber optic indicator light status display; Support knolink Ring network technology (fault recovery time less than 20ms); Support static multicast filtering technology, IGMP Snooping； Support broadcast storm suppression and port rate control functions; Support independent dual redundant power supply configuration; Support relay alarm output for power failure, fiber loss, storm and other status; Supports network management functions such as VLAN, QoS, port aggregation, and port mirroring; Industrial grade wide temperature design, fanless thermal conductivity design; Meets the IEC61850-3 design standard.
Product Details
overview
The IEC6026 series two-layer enhanced 100Mbps network management rack mounted industrial Ethernet switch is a high-performance Ethernet communication product developed specifically for the industrial communication field. This product uses high-performance industrial grade switching chips and supports 2 100Mbps optical and 24 100Mbps electrical interfaces in interface configuration, meeting the IEC61850-3 design standard and supporting static multicast filtering technology, IGMP Snooping； Support broadcast storm suppression and port rate control functions; Support relay alarm output for power failure, fiber loss, storm and other status; Support network management functions such as VLAN, QoS, port aggregation, and port mirroring; Industrial grade wide temperature design, fanless thermal conductivity design; It has the function of AC/DC220V (85-264VAC/110-370VDC) industrial redundant power input, which meets the power supply requirements of DC110/220V. The port supports both front and rear outgoing lines. Meet various industrial communication sites.
Technical Parameter
technical specifications
FUNCTION
|
switching |
Support port speed limit Support port aggregation Support port flow control Support port VLAN, GVRP, IEEE 802.1Q VLAN Support broadcast storm suppression |
|
Redundancy technology |
Support Knewuli Support MSTP/RSTP compatibility with STP |
|
multicast |
Support IGMP v1/v2, IGMP Snooping Support GMRP and static multicast |
|
Security technology |
Supports IEEE 802.1x Supports HTTP Support for Radius Support user grading Support MAC address binding |
|
Service Quality Management |
Support SPWRR queue scheduling Support QoS settings |
|
IP management |
Support DHCP server |
|
Management and Maintenance
|
Support CLI and WEB management methods, LLDPSNTPv4 Support Console and WEB management methods Support SNPv1/v2c, ACL Support software upgrade Support upper computer IP/MAC conflict alarm Support power loss alarm, power supply alarm, port alarm Support port mirroring Support log viewing
Support Li Support NTP Support accepting frames and sending frame statistics |
performance parameter
|
Technical Parameter |
|
|
Ethernet standard |
IEEE802.3 (Ethernet), IEEE802.3u (100ba) |
| Exchange attributes | |
|
Priority queue |
4 |
|
Number of VLANs |
4096 |
|
Number of multicast groups |
256 |
|
MAC Address |
8K |
|
Switched Bandwidth |
8.8Gbps |
|
exchange delay |
<5μs |
| interface | |
|
100Mbps interface |
Quantity: 26 |
|
Interface form: 1 × 9 fixed optical port (single/multi-mode optional, SC/FC/ST interface optional) or RJ45 100Mbps electrical port |
|
|
Interface speed: 100ba |
|
|
Debugging port |
RS232, RJ45 interface |
|
power terminal |
5-position 5.08mm spacing plug-in terminal |
|
Relay alarm terminal |
Three 5.08mm pitch plug-in terminals, 1A@24VDC |
| Transmission distance | |
|
Twisted pair cable |
100m (standard CAT5/CAT5e cable) |
|
Multimode Fiber |
Gigabit multimode: 850nm, 500m; 100Mbps multimode: 1310nm, 2km |
|
Single-mode fiber |
Gigabit single-mode: 1310nm, 20km; 100Mbps single-mode: 1310nm, 20/40km; 1550nm，60/80km |
| LED indicator light | |
|
Front panel indicator light |
Interface indicator light: li |
|
System running indicator light: RUN |
|
|
Power status indicator light: PWR1; PWR2 |
|
|
Alarm indicator light: ALARM |
|
|
Rear panel indicator light |
RJ45 electrical port indicator light: li |
|
Fiber optic indicator light: li |
|
| Power indicators | |
|
INPUT VOLTAGE |
AC/DC220V（85-264VAC/110-370VDC） |
| Input Current |
0.25A@110VAC /VDC |
| Overall Power Consumption |
<35W @ full load |
|
overload protection |
support |
| reverse polarity protection |
support |
|
redundancy protection |
support |
| work environment | |
| operation temperature |
-40℃~85℃ |
|
storage temperature |
-40℃~85℃ |
| relative humidity |
5%~95% (no condensation) |
| mechanical structure | |
|
casing |
IP40 protection level, aluminum alloy shell |
|
install |
19 inch 1U rack mounted, supporting front and rear wiring installation |
|
size |
482.6mm×44mm×305mm (W×H×D) |
| Industry standards | |
|
EMC |
EN61000-4-2（ESD），Level 4 EN61000-4-3（RS），Level 4 EN61000-4-4（EFT），Level 4 EN61000-4-5（Surge），Level 4 EN61000-4-6（CS），Level 4 EN61000-4-8，Level 5 |
|
impact |
IEC60068–2-27 |
| free fall |
IEC60068-2-32 |
|
vibrate |
IEC60068-2-6 |
| warranty | |
|
defects liability period |
5 years |
|
authentication |
|
|
CE、FCC、RoHS |
|
ordering information
Data Download
| name |
|---|
Similar Product Recommend
