Industrial 30A three-phase cabinet air conditioning controller

The AAC series hanging cabinet air conditioning controller is mainly used for remote infrared control of hanging cabinet air conditioning and cabinet air conditioning, while supporting air conditioning operation electrical parameter monitoring and energy metering functions. It has control functions such as forced control, infrared control, temperature control, and time control. Supporting communication functions such as LoRaWAN and RS485, it can be used in conjunction with air conditioning control systems to achieve centralized control of on hook air conditioning and cabinet air conditioning in public buildings, for energy conservation and consumption reduction, and to reduce electricity bills; It can also be used as a regulating tool for air conditioning to participate in demand side management.

1、 Main control functions

This controller supports multiple control modes and is suitable for scenarios that require fine control and energy-saving management:

Infrared control: Remote control of air conditioning switch, mode, temperature, wind speed, wind direction, etc.

Switching control (optional): It can forcibly disconnect the power supply of the air conditioner, suitable for safety or energy-saving management.

Time control: Set the usage period of the air conditioner to avoid power consumption during non working hours.

Human body sensing control (requires external sensors): Implement energy-saving logic of "turning off air conditioning when people walk".

Electrical parameters and energy metering: Real time monitoring of voltage, current, power, and electricity consumption for energy consumption analysis.

2、 Applicable scenarios

Public buildings, such as office buildings, schools, hospitals, shopping malls, etc., can centrally control multiple air conditioners to achieve energy-saving management.

Commercial air conditioning system: used for remote monitoring and scheduling of cabinet air conditioning, supporting time and area control.

Demand Side Response (DSM): Participate in grid peak shaving and automatically limit or turn off air conditioning during peak electricity consumption periods.

Intelligent building system: Connected to the building automation system through LoRa/LoRaWAN/RS485 to achieve centralized air conditioning management.

School classroom air conditioning: Local switch for students, remote monitoring of electricity usage by the logistics center, and discovering that the air conditioning was not turned off after school.

Factory workshop cabinet machine: Workers manually control it, and management personnel calculate the electricity cost of air conditioning in each area.

Hotel public area air conditioning: local start stop, engineering department monitors equipment status to prevent abnormal power consumption.

3、 Technical parameters

AAC300 is suitable for three-phase cabinet air conditioning, with an input current of 30A and an input voltage of 3 × 220/380V, and can support high-power three-phase air conditioning equipment.

4、 Appearance and size

5、 Installation and wiring

1. Mark the hole positions on the wall where equipment needs to be installed using a pen according to the dimensions shown in the diagram;

2. Use an electric drill to align with the hole markings and drill holes separately;

3. Insert the yellow plastic expansion tube into the drilled hole, use a hammer to drive the expansion tube into the wall, and tighten the screw (note that the screw used to hang the pile body cannot be used)

Tighten);

4. Hang the air conditioning controller on the wall.

Industrial 30A three-phase cabinet air conditioning controller

Industrial 30A three-phase cabinet air conditioning controller