Incubator D

This product is suitable for constant temperature testing, environmental testing, low-temperature cultivation, refrigeration storage and other occasions It includes water analysis cultivation, fermentation, various constant temperature tests, environmental tests, water analysis, BOD determination, microbial culture substance denaturation tests, and storage of culture media, serum, drugs, and other substances Widely used in research fields such as healthcare, biopharmaceuticals, agricultural research, and environmental protection.

Product Parameters:

1. Single door structure with visible observation window, which can maintain a stable constant temperature state.

2. Fixed value running, program running, automatic stop running, and automatic start running can all be achieved.

3. Directly set relevant parameters on the touch screen.

After a power outage, the power compensation function can automatically restore the operation to the originally set temperature.

5. It has safety functions such as compressor overload protection, independent over rise protector, overcurrent leakage protection switch, and self diagnostic circuit (temperature sensor abnormality, heater disconnection, SSR short circuit, automatic over rise prevention).

6. Method: Forced air circulation

7. Operating temperature range: -10~85 ℃; About 30 minutes at 20-50 ℃; 20~-10 ℃ for about 65 minutes

8. Temperature regulation accuracy: ± 0.3 ℃

9. Temperature distribution accuracy: ± 1.0 ℃ (AT37 ℃)

10. Interior: SUS304 stainless steel plate.

11. Exterior: Cold rolled steel plate, surface electrostatic powder coating, can maintain the appearance of the product clean, beautiful and fashionable for a long time.

12. Compressor: air-cooled fully enclosed compressor 375W, R134A refrigerant; The compressor is controlled by a temperature controller and can operate in a cyclic mode.

13. Defrosting mechanism: manual defrosting; Automatic defrosting: timed defrosting, cyclic defrosting, defrosting time can be set.

14. Sensor: Temperature regulator Pt platinum resistor, over temperature protection K-type thermocouple.

15. Lead hole: inner diameter ￠ 37mm, one on the left/right side.

16. Temperature control method: PID

17. Temperature measurement display: directly displayed on the touch screen

18. Set temperature display: directly displayed on the touch screen

19. Timer: 0-999 hours and 59 minutes

20. Additional features: timer function, cumulative time function (up to 49999 hours of cumulative time), deviation correction function, clock display, key lock locking function

21. Program mode: up to 32 steps, can be run repeatedly at will

22. Internal volume: 310L

23. Partition load-bearing capacity: 15kg/layer; Standard partition: 3 layers; Maximum optional: 23 layers; Partition spacing: 30mm

25. Power supply: AC220V 10A.